CCI CSR-30 Emulsion Remover – Powerful, Economical Screen Reclaiming Solution

Up to 55:1 Dilution — Exceptional Economy

One gallon of CSR-30 concentrate makes up to 55 gallons of working solution at maximum dilution, or 20 gallons at standard 1:20. The per-screen cost of CSR-30 is dramatically lower than ready-to-use emulsion removers. For high-volume shops, this compounds quickly into significant savings.

Immediately Liquifies Emulsion

CSR-30 doesn’t soften emulsion gradually — it immediately liquifies and breaks it down on contact. Apply, allow 30 seconds to penetrate, scrub, and rinse. Fast turnaround, no extended dwell time required for standard emulsions.

All Emulsion Types on All Mesh

Works on photopolymer, diazo, and capillary film emulsions — covering every stencil system used in professional screen printing. Safe on all mesh types and thread counts.

Auto Reclaim Safe: No Crystallization, No Clogging

One of the most important properties of CSR-30 is what it doesn’t do. It will not crystallize, coagulate, or plug rinse jet nozzles in automatic reclaiming units. This is not universal among concentrated emulsion removers — Murakami ER-605, for example, foams and is specifically not recommended for auto reclaim. CSR-30 is safe for automated systems.

Three Use Methods

Manual spray application, dip tank soaking, and automatic reclaiming systems — all supported. Use the same concentrate across every reclaim workflow in your shop.

Biodegradable When Diluted

The diluted working solution is biodegradable and drain safe under standard conditions. The concentrate itself is corrosive and combustible (hence the hazmat shipping classification). Dilution transforms it into an environmentally responsible reclaim solution.

Dramatically Speeds Reclaim

Immediate emulsion breakdown accelerates the entire reclaim cycle. Less dwell time, less scrubbing, faster pressure rinse. More screens per hour through your reclaim process.

Corrosive & Combustible Concentrate — Handle With Care

The undiluted concentrate is corrosive and combustible. Always wear gloves and eye protection when handling the concentrate. Store in a cool, well-ventilated area away from heat sources. Consult the SDS before use. Once diluted per the recommended ratio, safety profile improves significantly.

Max Dilution55:1

Standard: 1:20

Emulsion TypesAll Types

Photopolymer · Diazo · Cap Film

Auto ReclaimSafe ✔

No crystallization or clogging

Hazmat1 Gal+ Only

UPS $21/box · Quart = none

Hazmat Shipping Notice

Sizes 1 gallon and larger are classified as hazardous materials and require a UPS Hazmat fee of $21.00 per box, added automatically at checkout. This fee applies even if your order qualifies for free shipping. Quart size ships standard — no hazmat fee.

⚠️ Hazmat Shipping — What to Expect

1 gallon and larger: Classified as hazardous material by the DOT. A UPS Hazmat fee of $21.00 per box is added at checkout automatically. This fee applies even if your order qualifies for free shipping.

Quart size: Ships as non-hazardous — no hazmat fee. If you want to try CSR-30 first, start with a quart.

Why is it hazardous? The undiluted concentrate is corrosive and combustible. Once diluted at 1:20 or greater, the working solution is biodegradable and non-hazardous.

💰 Economy of CSR-30 vs. RTU Removers

A ready-to-use emulsion remover is 100% working solution. CSR-30 at 1:20 turns 1 gallon into 21 gallons of working solution. At 1:55, 1 gallon becomes 56 gallons.

Even after adding the $21 hazmat fee, the per-gallon-of-working-solution cost of CSR-30 is a fraction of RTU alternatives. For any shop running more than a few dozen screens per week, CSR-30 pays for itself quickly.