Matsui SI0324 Yama Puff Base Silicone Ink – High-Expansion 3D Puff Silicone Ink for Screen Printing

Matsui

The Matsui Yama Puff Base (SI0324) is a high-expansion 3D puff silicone ink — it foams into a dramatic, rounded, raised print while staying soft and flexible. Print low mesh for maximum loft on athleisure, streetwear and textured branding, with the stretch and wash durability of silicone. Catalyze at 10%; tint up to 10% with Yama pigments.

Dramatic 3D puff
Foam-like expansion

Soft & flexible
Full silicone stretch

Low mesh = more loft
60–110 mesh

Tint any color
Up to 10% pigment

Catalyst required
90/10 to cure

Streetwear & athleisure
Textured branding

★ Print low mesh for maximum loft and don’t over-flash — over-flashing kills the puff. Catalyze at 10%.

Big, soft, stretchy puff. 3D foam texture that still moves with the garment. Questions on the effect? Call 512-454-0505.

Price range: $94.00 through $1,892.00

Description

Matsui Yama Puff Base — High-Expansion 3D Puff

Puff prints grab attention — bold, rounded, dimensional lettering and graphics you can spot across a room. The Matsui Yama Puff Base delivers a dramatic 3D foam-like expansion as it cures, but with a twist the old plastisol puffs can’t match: it stays soft, flexible and stretchy. Print it through a low mesh for maximum loft, and the puff rises into a rounded, tactile texture that moves with high-stretch fabric instead of cracking. It’s built for athleisure, streetwear and textured branding, holds up to washing, and can be tinted up to 10% with Yama pigments for any color.

Why Print Puff

Dramatic dimension

Foams into a bold, rounded 3D puff that makes lettering and graphics stand out.

Soft & stretchy

Stays flexible and rebounds with the fabric — no cracking on stretch garments.

Dial the loft

Lower mesh and more strokes build more height; tune the puff to the look you want.

Any color

Tint up to 10% with Yama pigments for custom puff colors.

How to Print Puff

1 · Catalyze

Stir, add 10% catalyst (and up to 10% pigment for color), mix uniform, rest 5–10 min. 4–6 hr pot life.

2 · Print low mesh

60–110 mesh (24–43T) for maximum puff, 60–70 durometer or triple-duro squeegee, 1–3 strokes depending on desired loft. Solvent-resistant emulsion.

3 · Cure to rise

Final cure 300–320°F for 1–2 min (film above 250°F) — this is where the puff expands. Don’t over-flash beforehand or you’ll lose loft.

Don’t over-flash. Puff rises at final cure. Over-flashing before curing flattens the loft — use only a light flash if layering.

Why Buy From River City Supply?

Real screen printers. Real support. Genuine Matsui ink.

Real printers on staff

Puff loft comes down to mesh and cure — we’ll help you dial it in. Call (512) 454-0505.

Genuine Matsui silicone

Authentic Yama inks, bases and catalyst — the real performance system.

The whole silicone system

Puff, HD, emboss and gloss effects, plus bases, colors and catalyst — in stock.

Financing available

Stocking up on ink and equipment? Apply for equipment financing.

Fast shipping + 1-hour pickup

Ships quick, and in-stock items are ready for pickup within an hour in Central Texas.

Support after the sale

Family-run and here Monday–Friday, 9–5, long after your order ships.

Call (512) 454-0505

You’ll also need

The required silicone catalyst, plus a solvent-resistant emulsion and silicone-safe cleaner. Fine-tune flow with Yama Reducer.

More dimensional effects

Try Yama HD for crisp raised logos, Emboss Base for sculpted texture, or top with High Gloss.

New to puff printing?

Call us and we’ll walk you through mesh, strokes and cure for big, clean, soft puff.

Call 512-454-0505

Apply for financing

Building out your silicone system? Spread the cost with simple equipment financing.

Explore Financing

Technical Specifications

Matsui Yama Puff Base (SI0324) — Technical Specifications

Type	3D puff silicone base (high-expansion)
Part number	SI0324
Use	Dramatic raised puff texture (tonal or tinted)
Catalyst	Required — 90% ink / 10% Matsui silicone catalyst
Pigment load	0–10% Yama pigments by weight
Finish	Matte, raised puff texture
Fabric types	Polyester, spandex, nylon & blends
Mesh	60–110 mesh (24–43T) for maximum puff
Squeegee	60–70 durometer or triple-duro; 1–3 strokes
Flash cure	~220°F (104°C) for 5–8 seconds
Cure temp	300–320°F (150–160°C) for 1–2 minutes
Ink film temp	Above 250°F (121°C) internal
Pot life	4–6 hours after mixing
Storage	65–77°F, kept sealed
Shelf life	12 months unopened
Sizes	Quart, Gallon & 5-Gallon
Shipping	Drop ships from Matsui — Gardena, CA

Puff rises at cure. Print low mesh for loft and cure fully to expand. Over-flashing before final cure flattens the puff. Test your fabric first.

Pairs Well With

Silicone Catalyst
Required — 10%Yama Pigments
Custom puff colors Yama HD
Crisp raised logos Yama Emboss Base
Sculpted texture Yama High Gloss
Glossy top coat Financing
Spread the cost

Technical Sheets / Safety Data Sheets / Documents

Matsui Yama Puff Base Technical Data Sheet

Yama Silicone Technical Sheet

FREQUENTLY ASKED QUESTIONS

Matsui Yama Puff Base (SI0324) — Frequently Asked Questions

What is the Yama Puff Base used for?

It’s a high-expansion 3D puff silicone ink. It foams into a bold, rounded, raised print for athleisure, streetwear and textured branding — and unlike old plastisol puffs, it stays soft, flexible and stretchy.

How do I get more loft?

Print through a lower mesh (60–110) and use more strokes. The puff rises at final cure, so make sure you’re curing fully and not over-flashing beforehand.

Can I color the puff?

Yes — tint up to 10% with Yama pigments for custom puff colors.

Why did my puff come out flat?

Almost always over-flashing before the final cure, which collapses the loft. Use only a light flash if layering and let it rise at final cure.

How is Puff different from HD and Emboss?

Puff foams into a rounded 3D texture; HD builds crisp, sharp-edged raised logos; Emboss gives a sculpted, leather-like surface.

What sizes are available?

Quart, gallon and 5-gallon. Call us for help sizing a job.

Why Buy From River City Supply?

Real screen printers. Real support. Genuine Matsui ink.

Real printers on staff

Puff loft comes down to mesh and cure — we’ll help you dial it in. Call (512) 454-0505.

Genuine Matsui silicone

Authentic Yama inks, bases and catalyst.

The whole silicone system

Whites, colors, bases, catalyst, reducer and effects.

Financing available

Apply for equipment financing, or ask us how.

Everything under one roof

Ink, emulsion, screens, presses and curing.

Support after the sale

Family-run and here Monday–Friday, 9–5.

Call (512) 454-0505

Reviews

Only logged in customers who have purchased this product may leave a review.

Matsui SI0324 Yama Puff Base Silicone Ink – High-Expansion 3D Puff Silicone Ink for Screen Printing

Description

Matsui Yama Puff Base — High-Expansion 3D Puff