Inktek Metallic Yellow Plastisol Ink – Vibrant Premium Metallic Screen Printing Ink
Inktek
Inktek Metallic Yellow is a non-phthalate metallic plastisol ink delivering a bright, high-visibility yellow metallic finish — vivid, energetic, and unmistakable. A key team and school color for programs across the country, metallic yellow also serves seasonal and safety-themed printing, fashion and lifestyle brands with yellow in their palette, and multi-metallic designs requiring a clean, bright yellow element.
Bright Yellow Metallic Finish
Non-Phthalate Formula
High-Visibility Color
Ready to Use
86–110 Mesh
Cure at 320°F
Same-Day Shipping Before 3:30 PM CTFree shipping on orders $200+ | (512) 454-0505
Price range: $39.99 through $125.99
Description
Inktek Metallic Yellow Non-Phthalate Plastisol Ink – Bright Yellow Metallic for Screen Printing
Inktek Metallic Yellow is a non-phthalate metallic plastisol ink delivering a bright, high-visibility yellow metallic finish — vivid, energetic, and unmistakable. A key team and school color for programs across the country, metallic yellow also serves seasonal and safety-themed printing, fashion and lifestyle brands with yellow in their palette, and multi-metallic designs requiring a clean, bright yellow element.
Available in Quart, Gallon, and 5-Gallon. Non-phthalate. Stir thoroughly before use.
Authorized Inktek Distributor Since 2008
17+ Years Screen Printing Supply
Trusted by Production Shops Nationwide
San Antonio Warehouse — Same-Day Shipping Before 3:30 PM CT
Is This the Right Ink for Your Job?
Use This When You Want…
✓
Printing yellow school colors or team spirit apparel
✓
High-visibility or safety-themed apparel where yellow metallic adds impact
✓
Seasonal designs (summer, sunflower, beach themes) with metallic yellow
✓
Fashion brands using yellow as a primary accent color
Consider Something Else If You Need…
✗
Need warm gold tone (use Metallic Gold or Bobcat Gold)
✗
Need lime or chartreuse (blend Yellow + Green for custom tones)
Key Features
Bright Yellow Metallic
High-saturation yellow metallic with strong sheen. Maximum visibility and energy — the brightest color in the visible spectrum with an added metallic dimension.
Non-Phthalate Formula
Phthalate-free for school, retailer, children’s apparel, and compliance program applications.
School Colors & Athletic Programs
Yellow (often called “old gold” in school color systems) is a top-5 school color in the US. Metallic Yellow in jersey graphics and spirit wear delivers the premium metallic upgrade.
High-Visibility Applications
Yellow’s inherent high-visibility makes Metallic Yellow effective in safety-themed work wear, construction apparel, and utility garments where metallic yellow graphics add both visibility and premium character.
Mix for Warm Spectrum Metallics
Blend with Metallic Gold for deep antique yellow. Blend with Metallic Orange for tangerine-gold. Blend with Metallic Green for lime and chartreuse tones.
Ready to Use
Stir and print directly. No modification required.
Pairs Best With
Yellow + Black is a high-contrast classic team color and safety color combination
Blend Yellow + Orange for tangerine, amber, and warm seasonal metallic tones
Yellow Metallic Applications in Team, Safety & Seasonal Printing
School Colors & Athletic Team Wear
Yellow is among the most common US school colors, particularly in “blue and gold” and “black and gold” color schemes. Metallic Yellow for jersey graphics, spirit wear, and team merchandise upgrades standard yellow to premium metallic character.
Safety & Work Wear Apparel
Yellow’s high-visibility properties make it a staple in safety and work wear color systems. Metallic Yellow adds premium dimension to safety logos and graphic elements on industrial and utility garments.
Seasonal & Summer Apparel
Summer, beach, sunflower, and warm-season themed prints are natural applications for bright metallic yellow. The sheen adds visual energy that aligns with warm-season aesthetic themes.
Step-by-Step Press Guide
1
Stir Thoroughly from Bottom
Metallic pigment particles settle quickly. Stir vigorously from the very bottom of the container before printing. The ink should look uniform in color and sheen throughout.
2
Set Up 86–110 Mesh Screen
Use 86 mesh for maximum metallic coverage. Use 110 mesh for designs requiring sharper detail edges. Do not use finer mesh — insufficient ink deposit reduces metallic sheen significantly.
3
Optional: White Underbase on Dark Garments
For dark garments, print and fully cure a white underbase first. Metallic colors are semi-opaque — white base dramatically improves color accuracy and sheen brightness.
4
Print with Firm, Even Squeegee Pressure
Use 65–70 durometer squeegee. Consistent pressure and angle across all print strokes is essential for even metallic coverage.
5
Re-Stir Every 15–20 Minutes
Metallic particles settle during extended runs. Re-stir the container every 15–20 minutes for consistent sheen throughout production.
6
Cure at 320°F — Verify at Garment Surface
Use a temperature strip or donut probe at the garment surface — not dryer air temperature. Metallic particles affect heat absorption.
7
Wash Test Before Production Release
Print a test garment, fully cure, run 3–5 wash cycles. Metallic sheen should be unchanged after washing.
Troubleshooting Guide
Common issues, their most likely causes, and how to fix them before your next production run.
| Symptom | Likely Cause | Fix |
|---|---|---|
| Metallic sheen looks dull immediately after printing | Ink particles not suspended — not stirred from bottom | Stir container vigorously from the bottom until uniform sheen is visible throughout, reload and reprint. |
| Metallic sheen disappears after 1–2 washes | Under-cure — most common cause | Verify 320°F at garment surface with temp tape. Increase dwell time. Run 3–5 wash cycles to confirm before full production. |
| Metallic coverage patchy or streaky | Inconsistent squeegee pressure or particles settled in screen | Maintain consistent squeegee angle and pressure. Re-stir ink container every 15–20 minutes. |
| Color looks different on dark garments | Dark garment color influencing metallic hue | Use a fully cured white underbase — garment color significantly affects metallic appearance. |
| Color less vibrant than sample image | Garment substrate or partial cure effect | Verify full cure at 320°F garment surface. Test on your specific garment substrate before production. |
| Ink not flowing well through screen | Ink too cold or particles not suspended | Allow ink to reach room temperature. Stir thoroughly from the bottom. |
Complete Inktek Metallic Plastisol Ink Series — All Colors
All Inktek metallic inks are non-phthalate, ready-to-use, and cure at 320°F. Click any color to view the full product page.
Which Size Is Right for Your Shop?
Plastisol ink yield varies by mesh count, coverage area, and garment substrate. Use this guide as a starting benchmark — actual yield may differ based on your specific setup.
| Size | Approx. Yield* | Best For |
|---|---|---|
| Quart (32 oz) | 400–600 standard prints | Testing new colors, short-run specialty jobs, small shops with diverse color needs |
| Gallon (128 oz) | 1,500–2,500 standard prints | Production shops running this color regularly, mid-volume seasonal runs, in-stock working inventory |
| 5 Gallon (640 oz) | 7,500–12,000 standard prints | High-volume production, team wear programs, contract printing, shops where this is a primary working color |
*Yield estimates based on standard left-chest size print at 110 mesh. Large-format prints, specialty effects inks, and heavy ink deposits will yield fewer prints per container. Specialty inks (metallics, glow, puff) typically yield fewer prints than standard plastisol due to lower mesh counts and heavier deposits required.
What You’ll Also Need
Everything else required to get this ink from the container to the garment — shop these categories at River City Supply.
86–110 mesh for metallic plastisol inks — coarser mesh deposits more ink for stronger metallic sheen
65–70 durometer for metallic inks — firm enough for adequate deposit without excess pressure
Dual-cure emulsion for your mesh and exposure setup
Flash dryers and conveyor dryers — full 320°F cure is essential for metallic sheen durability
Hold garments in registration during printing
Screen wash to clean up metallic plastisol between runs
How to Wash Test Metallic Plastisol Prints
Run a wash test any time you change ink, mesh, garment type, or dryer settings. Full cure is the most critical factor for metallic ink durability — under-cured metallics dull and delaminate quickly.
Step 1 — Cure a Test Print
Print and cure a test garment at your production dryer settings. Let cool completely before washing.
Step 2 — Wash Hot
Machine wash on the hottest setting with standard detergent. Hot water is the stress test — if it holds here, it holds everywhere.
Step 3 — Repeat 3–5 Cycles
Run 3–5 full wash/dry cycles. Properly cured metallic prints retain full sheen. Under-cured prints dull or peel within the first 1–3 washes.
Step 4 — Inspect
Check for: sheen loss, cracking, peeling, or ink loss. Metallic sheen should be unchanged. Stretch the print firmly — no cracking or delamination indicates proper cure.
Metallic sheen dulling after wash = under-cure. Use a donut probe or temp tape on the actual garment surface to verify cure temperature — not dryer air temp. Metallic particles can reflect heat differently than standard plastisol. Increase dwell time and retest.
Stir Thoroughly Before Printing
Metallic particles settle. Stir from the bottom before every print run.
Verify Full Cure
Check actual garment temperature at 320°F with temp tape before releasing production.
Questions about this product?
Call (512) 454-0505 or email [email protected] — Mon–Fri 9am–5pm CT
River City Supply · Authorized Inktek Distributor Since 2008
Technical Specifications
Technical Specifications
| Product Information | |
| Product Name | Inktek Metallic Yellow Non-Phthalate Plastisol Ink |
| Brand | Inktek (Printers Choice) |
| Type | Metallic plastisol ink — ready to use |
| Formula | Non-phthalate |
| Available Sizes | Quart, Gallon, 5 Gallon |
| Printing Parameters | |
| Recommended Mesh | 86–110 mesh for full metallic coverage |
| Squeegee Durometer | 65–70 durometer |
| Press Type | Manual and automatic presses |
| Dark Garments | White underbase recommended for maximum metallic brightness |
| Pre-Print | Stir thoroughly from the bottom before every print run |
| Curing | |
| Cure Temperature | 320°F (160°C) |
| Cure Time | 60 seconds at full cure temperature |
| Critical Note | Full cure is essential for metallic sheen durability — verify with temp strip on garment surface, not dryer air temp |
| Compliance | |
| Phthalate Status | Non-phthalate formula |
| Suitable For | Applications requiring phthalate-free plastisol compliance |
| Storage | |
| Storage Temperature | Room temperature — avoid freezing and prolonged heat above 100°F |
| Shelf Life | Approximately 2 years from manufacturing date when stored properly |
| Settling | Metallic particles settle in storage — normal; stir thoroughly before use |
| Documents | |
| Safety Data Sheet | Inktek SDS (PDF) |
Technical Sheets / Safety Data Sheets / Documents
FREQUENTLY ASKED QUESTIONS
Frequently Asked Questions
Do I need an underbase for yellow metallic on dark garments?
For most dark garments, a white underbase significantly improves the brightness and clarity of the metallic yellow. Metallic inks have reasonable opacity and can sometimes print direct on dark fabrics, but the white base reflects the metallic sheen upward rather than letting the dark fabric absorb it. Test both approaches on your specific garment and decide based on the opacity result.
Why is my metallic print dulling after washing?
Dulling metallic prints after washing are almost always the result of under-cure. The metallic pigment particles need to be fully encapsulated in the cured plastisol film for wash-durable sheen. Check your actual garment surface temperature with a donut probe or temp tape — not the dryer air temperature. Metallic particles can reflect heat differently than standard plastisol, so even a correctly-calibrated dryer may under-cure metallics if you are relying on air temperature alone. Increase dwell time and retest with a wash test before releasing production.
How do I store metallic ink between uses?
Store at room temperature in the sealed container. Avoid freezing (damages the plastisol binder) and prolonged storage above 100°F. Metallic particles will settle to the bottom of the container during storage — this is normal and does not indicate a problem with the ink. Stir thoroughly from the bottom before each use to re-suspend particles uniformly. Properly stored Inktek plastisol inks have a shelf life of approximately 2 years from the manufacturing date.
Can I mix this metallic with other colors in the series?
Yes — Inktek metallic inks in this non-phthalate series are compatible with each other and can be blended to create custom metallic tones. Mixing yellow metallic with other colors in the series produces intermediate metallic shades. Blend by weight and test print before running production. Note that adding non-metallic plastisols in significant amounts will reduce the metallic sheen — for best metallic results, blend only within the metallic series.
What mesh count should I use?
86–110 mesh is the standard range for this metallic ink. 86 mesh deposits the heaviest ink film and produces the most intense, opaque metallic surface — best for large fill areas and dark garments. 110 mesh balances coverage with detail for logos and text elements. Avoid going above 160 mesh, as the thinner ink deposit produces significantly less metallic sheen. For fine-line detail work requiring higher mesh, test to confirm acceptable metallic character at your required mesh count.
Is this a non-phthalate ink — why does it matter?
Yes — the entire Inktek metallic series is formulated without phthalate plasticizers. Phthalate-free status matters for school district purchasing requirements, major retailer compliance programs (Walmart, Target, etc.), children’s apparel regulations under CPSIA, and export markets with phthalate restrictions. If your production involves any of these compliance-sensitive applications, specifying non-phthalate metallic plastisol is either required or strongly recommended.
Still have questions?
(512) 454-0505 · [email protected] · Mon–Fri 9am–5pm CT
Reviews
Only logged in customers who have purchased this product may leave a review.
You May Also Like
Related products
-
Inktek SE490 Process Yellow – High-Quality Black Plastisol Ink for Four-Color Process Screen Printing
Price range: $40.99 through $306.99 -
Inktek 425 Charcoal Plastisol Ink — Low Cure, Soft Hand, High Opacity Screen Printing Ink for Cotton & Poly Blends
Price range: $44.99 through $499.99 -
Inktek HS6953 Triple Strength Process Cyan – High-Quality Black Plastisol Ink for Four-Color Process Screen Printing
Price range: $34.99 through $88.99 -
Inktek HS2993 Triple Strength Process Magenta – High-Quality Black Plastisol Ink for Four-Color Process Screen Printing
Price range: $39.99 through $108.99
Reviews