ICC 858 Screen Printing Stain Remover & Degreaser – Ghost Image Removal & Mesh Prep for Screen Printers
ICC
ICC 858 is a dual-function screen degreaser and stain remover — it prepares freshly reclaimed mesh for recoating by removing contaminants that cause pinholes and adhesion failure, while also removing ghost images and ink staining left after standard reclaim. One product for both mesh prep and stain removal in the screen reclaim workflow.
Price range: $24.99 through $249.99
Description
Degreaser and Ghost Image Remover in One
Most screen prep workflows require two separate steps and products: a degreaser to remove oils and contaminants before coating, and a stain/haze remover to address ghost images after reclaim. ICC 858 handles both functions. Applied after emulsion removal, it simultaneously degreases the mesh and removes ink staining — preparing screens for recoating in a single product step.
Dual-Function Chemistry
Degreases mesh to remove oils, silicone, and contaminants that cause pinholes and adhesion failure, while simultaneously removing ink staining and ghost images.
Pinhole Prevention
Proper degreasing before coating is the primary preventive measure against pinholes. ICC 858 provides complete degreasing to ensure clean mesh-to-emulsion bonding.
Ghost Image Removal
Removes the faint stencil shadows left after standard reclaiming. Restores mesh to clear, uncontaminated state for recoating.
ICC Product Line
Part of the ICC chemical line including ICC 888/931/8270 (degradents), ICC 387 (emulsion remover), and ICC 396 (hand cleaner).
What’s Included
- ✓ICC 858 Screen Degreaser & Stain Remover (Quart, Gallon, or 5 Gallon)
- ✓Safety Data Sheet (PDF)
Post-Reclaim Application
Apply after emulsion removal as the final reclaim step before recoating. Scrub in, rinse thoroughly, and inspect for ghost image clearance.
Pinhole Troubleshooting
If you’re experiencing pinholes in finished screens, degreasing with ICC 858 before coating typically resolves contamination-related pinhole causes.
Ghost Image Management
Regular use of 858 prevents ghost image accumulation over multiple print runs. Particularly important for fine-mesh screens used in halftone and detail work.
The Complete ICC Chemical Line
ICC makes a complete system of screen printing chemicals that take you from the press through full screen reclaim. Here’s every product in the ICC line available at River City Supply — what each one does, when to use it, and how it fits into your workflow:
1 · On-Press Cleanup
ICC 887 Spray/Wipe
What: Emulsion-safe on-press press wash for plastisol ink color changes.
When: At the press during color changes. Safe to use while emulsion is still on screen.
✔ Emulsion-safe, no water rinse, wipe clean
1 · On-Press Cleanup
ICC 926 Premium Spray/Wipe
What: Non-flammable, emulsion-safe premium press wash for plastisol inks.
When: On-press color changes in shops where non-flammable chemistry is required.
✔ Non-flammable, emulsion-safe, no water rinse
2 · Ink Removal
ICC 888 Ink Degradent
What: Screen wash and ink degradent for removing plastisol ink during reclaim.
When: In the reclaim room after printing — apply, agitate, rinse with water.
✔ Water-rinse required, plastisol removal
2 · Ink Removal
ICC 8270 Ink Degradent
What: Concentrated plastisol ink degradent — stronger formula for heavy ink deposits.
When: Reclaim room ink removal. For screens with heavy ink buildup or dried-on plastisol.
✔ Concentrated, heavy-duty ink removal
2 · Ink Removal
ICC 931 Ink Degradent
What: Professional-grade ink degradent and screen wash for plastisol reclaim.
When: Reclaim room ink removal step — before emulsion removal.
✔ Professional grade, plastisol reclaim
3 · Emulsion Removal
ICC 935 Emulsion Remover (RTU)
What: Ready-to-use emulsion remover. Apply, wait, high-pressure rinse.
When: After ink removal — strip the emulsion stencil from the mesh.
✔ Ready-to-use, no mixing required
3 · Emulsion Removal
ICC 937 Emulsion Remover
What: Concentrated emulsion remover — dilute with water for cost-effective reclaim.
When: After ink removal — strip emulsion. Dilute per label for your system.
✔ Concentrated, economical, dilute-to-use
3 · Emulsion Removal
ICC 8470 Emulsion Remover
What: High-performance emulsion remover for fast stencil breakdown.
When: After ink removal — fast emulsion strip for high-volume reclaim workflows.
✔ High-performance, fast stencil removal
← THIS PRODUCT
4 · Haze & Ghost Removal
ICC 858 Degreaser/Haze Remover
What: Dual-purpose mesh degreaser and haze remover. Removes ghost images and prepares mesh.
When: After emulsion removal — treat ink staining and ghost images before recoating.
✔ Degreaser + haze remover in one
5 · Hand Cleanup
ICC 396 Hand Cleaner
What: Non-abrasive hand cleaner with conditioner. Removes plastisol ink, adhesives, and grease.
When: Anytime during production — removes ink from hands without drying skin.
✔ Non-abrasive, skin conditioner, daily use
🧪 ICC Workflow at a Glance
| Step | Process | ICC Products | Notes |
|---|---|---|---|
| 1 | On-Press | ICC 887 & ICC 926 | Press cleanup during color changes. No water rinse. Emulsion-safe. |
| 2 | Ink Removal | ICC 888 / 8270 / 931 | Reclaim room. Remove plastisol ink before emulsion strip. Water rinse. |
| 3 | Emulsion Strip | ICC 935 / 937 / 8470 | After ink removal. Strip emulsion stencil. High-pressure water rinse. |
| 4 | Haze Removal | ICC 858 | After emulsion removal. Treat ghost images. Prep mesh for recoating. |
| 5 | Hand Cleanup | ICC 396 | Any time. Remove ink from hands without drying skin. |
Technical Specifications
| ICC 858 Degreaser & Haze Remover — Technical Specifications | |
|---|---|
| Product Name | ICC 858 Screen Degreaser & Haze Remover |
| Brand | ICC — International Chemical Corp. |
| Type | Dual-Purpose Degreaser & Ghost Image Remover |
| Function | Removes ink haze, ghost images, and mesh contamination |
| Use Step | After emulsion removal — before recoating |
| Water Rinse Required | Yes — rinse thoroughly after application |
| Mesh Prep | Yes — degreases mesh for better emulsion adhesion |
| Brand | ICC |
| Available Sizes | Quart, Gallon, 5-Gallon |
Technical Sheets / Safety Data Sheets / Documents
FREQUENTLY ASKED QUESTIONS
What makes ICC 858 different from a standard degreaser?
Standard degreasers remove oils and contaminants — they don’t address ghost images. ICC 858 combines degreasing and stain/ghost image removal in one product, streamlining the post-reclaim prep step.
When do I apply ICC 858 in the reclaim process?
After emulsion removal (decoating). Apply 858 to the clean mesh, scrub, rinse thoroughly, and inspect. The screen is then ready for drying and recoating.
Does ICC 858 remove emulsion?
No. ICC 858 is a degreaser and stain remover — it works on clean mesh after emulsion has been removed. A separate emulsion remover is required for decoating.
Our team is here to help.
Reviews
Only logged in customers who have purchased this product may leave a review.
You May Also Like
Related products
-
Printers Choice Dip Tank Start Up Package – Complete Screen Reclaim Kit for Screen Printing
$549.99 -
Chromaline Chroma/Fill Blockout – High-Visibility Screen Blockout for Precision Screen Printing
$34.99 -
Blue Blockout Pen – Pinhole & Touch-Up Pen for Water-Based Screen Printing
$14.99 -
Murakami Emulsion Permanent Hardener A&B Quart Kit – Two-Part Stencil Hardener for Extreme Durability
$49.99
Reviews