Vastex LittleRed X1D Conveyor Dryer – Compact Power for DTG and More
Vastex
The Vastex LittleRed X1D is the smallest DTG-capable conveyor dryer in the industry, with a footprint as small as 8 square feet. A high-powered preheat boost zone rockets ink temperatures past 300°F within the first few inches of travel — critical for curing inkjet white, pretreatment, water-based, discharge, and DTF adhesives. Standard 280 CFM powered exhaust, dual digital PID control, and modular expandability. Available in 18″, 30″, and 54″ belt widths.
Price range: $4,495.00 through $8,555.00
Description
Vastex LittleRed X1D Conveyor Dryer
Compact Digital DTG-Capable Dryer | Powered Exhaust Standard
Same Dryer. Better Experience.
You can buy this Vastex dryer directly from the factory, or you can buy it from us — for the same price, with an added layer of support from a team that’s been running screen print shops since 2008. Here’s what you get:
Same or Better Pricing Than the Manufacturer
We match or beat Vastex direct pricing on every dryer — no markup for going through a dealer. You get the same equipment with an added layer of service. If you find a lower advertised price, call us and we’ll match it.
An Extra Layer of Support
Vastex builds great equipment, but when you need to troubleshoot a belt tracking issue at 4pm on a Friday, you want someone who picks up. We’ve been supporting screen printers since 2008 — phone, email, or text — with real operators who’ve run these dryers themselves.
Authorized Vastex Dealer Since 2008
We’re a factory-authorized Vastex distributor with 17+ years of screen printing industry experience. Full factory warranty applies, but your first point of contact for any issue is us — not a voicemail queue.
Accurate Lead Times & Freight Quotes
Most Vastex dryers are built-to-order and typically take 2–6 weeks to build before shipping. Larger Vastex dryers ship via LTL freight and freight is quoted separately based on your delivery ZIP and any special requirements (lift-gate, residential, etc.). Before you order, chat with us (Tidio chat icon), call (512) 454-0505, or email [email protected] and we’ll confirm an accurate lead time and freight quote for your exact configuration.
Setup & Training Help Included
We’ll walk you through unboxing, first-power-up, donut probe calibration, and your first real cure over the phone or video call — included with every dryer. No upcharge, no support-ticket queue.
Equipment Financing Made Easy
One call, one application, equipment financed. Section 179 tax advantages may apply. We’ve helped hundreds of shops finance their first (and fifth) Vastex dryer.
Why Choose the LittleRed X1D Conveyor Dryer
Smallest DTG-Capable Conveyor Dryer
The X1D-18 has the smallest footprint of any Vastex DTG-capable dryer — just 8 sq ft — yet matches output of most popular DTG printing systems.
Boost Zone Preheats Ink Past 300°F
A high-powered preheat zone rapidly brings ink temperature up, maximizing dwell time at proper cure temperature for inkjet white, pretreatment, water-based, and discharge inks.
Dual Digital PID Controller
Dual digital PID temperature controller accurate to ±1°F. Dual-zone heat control lets you fine-tune preheat and cure independently.
Standard Powered Exhaust (280 CFM)
Built-in 280 CFM exhaust removes moisture and air contaminants while cooling the housing and controls — critical for DTF adhesives and DTG inks.
What’s Included
Introducing the LittleRed X1D DTG Dryer
Watch Vastex walk through the LittleRed X1D — the smallest DTG-capable conveyor dryer in the industry. See the boost zone, the powered exhaust, the X-Series belt tracking, and why the X1D is matched perfectly to the output of popular DTG printing systems.
Engineering & Built-In Vastex DNA
Medium-Wavelength Infrared
Closely-spaced coils deliver high-density, medium-wavelength infrared heat — the wavelength range best absorbed by screen-printing inks. Raises the ink temperature directly, not the air, for the fastest cure without cold spots or under-curing.
15-Year Heater Warranty
Every Vastex heater carries an industry-leading 15-year warranty — the longest warranty in the industry. Vastex has been designing and building infrared dryers in Bethlehem, PA since 1960.
Digital PID Control ±1°F
Vastex’s PID temperature controller is accurate to ±1°F — repeatable cures shift after shift, day after day. Essential for consistent cure on water-based, discharge, and DTG inks where the temperature window is narrow and under-curing shows up fast.
Teflon-Coated Fiberglass Belt
Industry-standard Teflon-coated fiberglass conveyor belt shrugs off ink drips, solvent splashes, and years of hard use. Replacement belts are in-stock and ship same day.
Best For
Compare All Vastex Conveyor Dryers
Click any model to jump to its page. Each row shows belt width, heater configuration, and approximate throughput for plastisol, water-based, and DTG inks.
Production rates are approximations based on conditions including humidity, image size, ink coverage, and substrate. Actual results may vary. Call us and we’ll help you dial in the right model.
Before You Order
Ventilation Required
All infrared dryers benefit from proper ventilation. We can spec the right exhaust hood, ducting, and make-up air for your shop — ask when you call.
Electrical Requirements
240V models require a dedicated circuit. Call us with your amp service and we’ll confirm compatibility before you order.
Lead Time: 2–6 Weeks Build
Vastex dryers are built-to-order at the factory in Bethlehem, PA. Average lead time is 2–6 weeks depending on model, configuration, and current factory backlog. For an accurate lead time on your exact build, chat with us (Tidio), email, or call (512) 454-0505 before ordering.
Finance This Dryer — Low Monthly Payments
Equipment financing is available on all Vastex dryers through our financing partner. Section 179 tax advantages may apply for qualifying businesses — own the equipment outright with payments structured to fit your shop’s cash flow.
Talk to an Equipment Expert
Not sure which Vastex dryer is right for your shop? Our equipment team has been outfitting screen print shops since 2008. We’ll match you to the right size, voltage, and configuration — and make sure it fits your space, your budget, and your production goals.
Technical Specifications
Technical Specifications
| Specification | Detail |
|---|---|
| Model Numbers | LR-X1D-18, LR-X1D-30, LR-X1D-54 |
| Category | LittleRed X-Series (Digital/DTG) |
| Belt Width | 18″ / 30″ / 54″ |
| Belt Length | 48″ / 48″ / 66″ |
| Heater Width | 18″ / 24″ / 48″ |
| Total Wattage | Full-width IR + Boost Zone |
| Voltage | 240V |
| Plastisol Capacity | 162 / 150 / 260 garments/hr |
| Water-Based & Discharge | 81 / 65 / 90 garments/hr |
| DTG Capable | Yes – 34 / 29 / 65+ per hour |
| DTF Adhesives | Yes (standard powered exhaust) |
| Modular / Expandable | Yes – add chambers / extend belt |
| Footprint | As small as 8 sq ft (X1D-18) |
| Approx. Weight | 155–295 lbs depending on size |
| Temperature Control | Digital PID, accurate to ±1°F (±0.5°C) |
| Belt Material | Teflon-coated fiberglass |
| Belt Speed Control | DC variable, digital display |
| Heater Adjustment | 2″–7″ belt-to-heater clearance, tilting |
| Heater Warranty | 15 years (industry-leading) |
| Country of Origin | Made in USA — Bethlehem, Pennsylvania |
| Manufacturer | Vastex International, Inc. |
Optional Accessories & Add-Ons
- Modular heating chamber extensions
- Drop-down caster kit
- Return conveyor (30″ and 54″ models)
Need custom specs or configurations? Call (512) 454-0505 — we can build quotes with exhaust hoods, belt extensions, return conveyors, or additional heating chambers based on your shop layout.
Technical Sheets / Safety Data Sheets / Documents
FREQUENTLY ASKED QUESTIONS
Frequently Asked Questions
Reviews
Only logged in customers who have purchased this product may leave a review.
You May Also Like
Related products
-
ROQ Label T-Shirt Labeling Machine – Automatic Garment Label Application
-
Vastex LittleRed X2D Wide Conveyor Dryer – High-Output Curing for DTG, Plastisol, Water-Based & DTF
$7,240.00 -
ROQ NEXT Automatic Screen Printing Machine – Speed, Precision & Innovation for the Modern Print Shop
-
Graphtec CE8000-130 Plus 50” Plotter – Quiet Performance for Wide-Format Cutting – FREE SHIPPING
$4,895.00
Reviews