ROQ Impress P06C03-L4 Automatic Screen Printing Press – 3 Presses, 6 Stations, 4 Lasers
ROQ
ROQ Impress PRSS-IHPP06C03-L4 — the mid-volume production SKU from the ROQ Impress automated DTF & heat transfer press lineup. 6-station carousel with 3 programmable heat press heads and 4 laser positioning markers for millimeter-accurate transfer placement. Max pressing area of 400 × 500 mm (16″ × 20″) on every pallet. The P06C03 configuration is the workhorse of the current Impress lineup — three heat press heads running simultaneously on the same 6-pallet carousel footprint as the P06C02, but with ~66% higher throughput (up to 500 pcs/hr). Same compact 8.2′ diameter footprint as the P06C02, same slim 6.3′ height, but 50kg heavier because of the added third press head and its pneumatic gear. This is the sweet spot for most growing DTF fulfillment operations. Ships with ROQ’s full v4 feature set: rubber top pallets, independent per-head controls, programmable touchscreen recipes, pressure uniformization, and single-plug integration with ROQ’s automation module ecosystem (FEED, PEEL, PULL).
Description
ROQ Impress — 3 Heat Presses · 6 Stations · 4 Laser Markers
Configuration-Specific SKU · Up to 500 pieces/hour · Full v4 Technical Specs From the Official ROQ Factory Brochure Below
ROQ Impress P06C03 — 6 stations, 3 heat presses, 4 laser markers
Who Should Buy This Configuration
Best fit: Growing DTF fulfillment shops, established contract decorators scaling up, and print-on-demand operations serving peak volumes in the 300–500 pcs/hr range. The third heat press head adds meaningful throughput without expanding the press’s physical footprint — same 8.2′ diameter, 6.3′ height, fits the same floor space as a P06C02. Most shops that consider a P06C02 end up buying the P06C03 instead once they run the throughput math — the additional investment for a third press head is typically recovered quickly by the added 200 pcs/hr capacity. If your volume is below 300 pcs/hr, the P06C02-L4 saves upfront cost. If you need all 3 automation modules (FEED + PEEL + PULL) simultaneously, step up to the P08C04-L4 — both P06 configurations are capped at 2 attachments.
⚠️ Attachment Compatibility — Important Planning Note
This SKU is a P06 configuration. Per the official ROQ factory spec, P06C02 and P06C03 configurations support a maximum of 2 attachments simultaneously from the available automation modules (FEED, PEEL, PULL).
So you can run FEED + PEEL, or FEED + PULL, or PEEL + PULL — but not all three at once. Most P06 shops pick FEED + PEEL for automated placement and peeling, and handle garment unloading manually.
If you know you’ll eventually want all three automation modules, step up to the P08C04-L4 instead — it supports all 3 attachments simultaneously. It’s easier and more cost-effective to buy the right configuration upfront than to trade up later.
Compare All Three In-Stock Impress SKUs
All three in-stock SKUs ship with 4 laser positioning markers (L4) and share the same v4 template — rubber pallets, independent head keypad controls, programmable touchscreen, pressure uniformization, single-plug module integration. They differ in throughput, footprint, and — critically — how many automation modules each one supports. Tap any other SKU below to view its full page.
| Photo | SKU · Tier | Stations | Presses | Max Speed | Weight | 230V / 400V | Attachments |
|---|---|---|---|---|---|---|---|
 | P06C02-L4 → Starter Automation | 6 | 2 | 300/hr | 615 kg | 19A / 16A | 2 max |
| P06C03-L4 → Mid-Volume | 6 | 3 | 500/hr | 665 kg | 35A / 21A | 2 max |
 | P08C04-L4 → High-Volume + All 3 | 8 | 4 | 500/hr | 884 kg | 63A / 32A | All 3 |
Same ROQ Impress PRSS-IHPP06C03-L4. Better Buying Experience.
An automatic ROQ press is a 15–20 year production investment — not a checkout-page decision. You deserve an equipment partner who’ll spec it right the first time, coordinate installation with experienced trades, and stand behind the purchase for the full life of the machine.
Authorized ROQ Distributor — Direct Factory Pricing
We’re a factory-authorized ROQ dealer. We can quote the ROQ Impress PRSS-IHPP06C03-L4 at or below competitor pricing, bundle flash dryers, donut probes, conveyor dryers, and production supplies into one shipment, and consolidate freight for better rates.
An Extra Layer of Equipment Support
We’ve been speccing, selling, and installing automatic screen printing presses since 2008. When you call us, you talk to someone who’s stood next to a ROQ on a production floor — not a call-center rep reading from a PDF.
Full ROQ Solid Warranty — Industry’s Only Named Warranty
Your factory warranty stays fully intact — parts, labor, and travel covered per the ROQ Solid Warranty terms. But your first call goes to us in San Antonio. We coordinate service, source parts, and escalate to ROQ US or Portugal as needed.
Built-to-Order at the ROQ Factory
Every ROQ press is custom-built in Portugal with decades of refinement. 8–14 weeks built-to-order from the ROQ factory in Portugal. Ask us about occasional in-stock demo units and trade-in opportunities that ship faster.
Key Features — ROQ Impress Configuration
🎯 4 Laser Positioning Markers (L4)
This SKU ships with 4 laser positioning markers — projected onto the pallets to show exactly where each transfer belongs before pressing. Eliminates operator guesswork, keeps placement consistent across every garment, and makes setup changes visual rather than trial-and-error. All three current ROQ Impress SKUs (P06C02-L4, P06C03-L4, P08C04-L4) carry the L4 designation for 4 lasers.
🔥 3 Programmable Heat Press Heads
Each of the 3 heat press heads is independently programmable via the touchscreen — dwell time, pressure, and temperature per head, per recipe. Each head also has its own keypad for Start/Stop/Rotate CW/Rotate CCW/Press overrides — useful for maintenance, troubleshooting, or running different recipes on different heads simultaneously.
🎡 6-Station Rotating Carousel
The 6-pallet carousel keeps garments moving through the press cycle continuously. While one pallet is being pressed, another is being loaded, another is being unloaded, and the rest are in transit. Throughput far exceeds what any shuttle or clamshell press can match.
🔴 Rubber Top Pallets — Even Pressure
Every pallet is rubber-topped to distribute pressure evenly across garments with thick seams, pockets, hoods, and other uneven surfaces. Hard-platen presses struggle with these; the rubber conforms gently and delivers consistent transfer adhesion.
🎨 Multi-Transfer Compatibility
Presses DTF, screen print transfers, digital/screen hybrid, vinyl, HTV, twill, rhinestones, foil, cad-cut, player numbers, and specialty transfers. Save pressure/temperature/dwell recipes per transfer type — switch jobs in seconds by recalling the right recipe.
🧠 Programmable Touchscreen with Recipe Memory
Everything programmable from a single touchscreen: per-head pressure, temperature, dwell time, and full job recipes. Save unlimited recipes for repeat jobs — chest-print recipe for tees, back-yoke recipe for hoodies, sleeve recipe for long-sleeves. One-tap recall between jobs.
❄️ Mixed Hot + Cold Press (Not Available)
Mixed hot + cold peel support is not available on the P06C03 configuration. Factory spec limits mixed-press to the P08C04 (optional) and P10C05 (standard). If your job mix requires running hot-peel and cold-peel transfer types on the same line simultaneously, step up to the P08C04-L4.
🔌 Full ROQ Automation Ecosystem Compatible
Plugs into ROQ’s full automation module ecosystem. Add FEED for automated transfer placement, PEEL for automated film removal, and (on P08C04 / P10C05) PULL for automated garment unloading. Single-plug integration; all modules controlled from the Impress HMI.
💨 Pressure Uniformization Function
Integrated pressure-uniformization function applied automatically by the heat press ensures consistent application across every station. Eliminates the station-to-station variance that plagues manual multi-platen setups.
🔧 Low Utility Requirements
Runs on 35.5 l/min (74.8 ft³/h) compressed air at 3.5 bar operating pressure (6 bar work / 7 bar supply) and 35 A @ 3×230V or 21 A @ 3×400V electric draw. No special utilities — standard shop compressed air and 3-phase electric handle it.
🌍 Made in Portugal — ROQ Engineering
Manufactured at ROQ’s Oliveira de S. Mateus facility in Portugal alongside every other ROQ product. Same build quality, materials, and service support. Covered by the ROQ Solid Warranty: parts, labor, and technician travel.
Complete Your DTF Production Setup
The ROQ Impress is the application engine of a complete DTF production line — but it works even harder when paired with the two machines that produce the transfers it presses. Combine the Impress with the STS 24″ XPD-924D DTF Printer (the fastest dual-head DTF printer on the market) and the STS Automatic S20 Powder Shaker (even powder application with IR curing and HEPA filtration), and you’ve built a complete in-house DTF production business. Print your own transfers, shake your own powder, press at industrial scale — all under one roof, with zero reliance on outside transfer suppliers and unbeatable per-piece margins.
The 3-Step In-House DTF Production Workflow
STS 24″ XPD-924D prints your full-color CMYK+White artwork directly onto DTF film rolls.
Up to 188 ft²/hour · 1,200 DPI · dual AccuFine HD printheads · continuous white ink circulation.
POWDER
STS Automatic S20 Shaker evenly applies TPU adhesive powder to the wet ink, then cures it under IR heat — all automatically.
24″ width · HMI controls · HEPA filtration · no manual powder mess.
PRESS
ROQ Impress applies the finished transfers onto garments at industrial scale with automated precision.
Up to 600 pcs/hour · 2–5 heat press heads · laser placement · 1-operator workflow.
Build Your Complete DTF Production Line
Take It Further — See the Fully Automated Workflow
The 3 machines above give you a complete in-house DTF production line — but ROQ offers two add-on automation modules that bolt onto the Impress to automate the last remaining manual steps (transfer placement and film peeling). Watch the video below to see the fully-automated line in action:
Add-On Automation Modules — ROQ FEED, PEEL & PULL
These three optional ROQ modules bolt directly onto the Impress (standard module integration, controlled from the Impress HMI) to automate every manual step you saw in the video above. Add them to a P08C04 or P10C05 Impress and a single operator can run the entire line — loading blank garments while FEED places transfers, PEEL removes backing film, and PULL unloads and stacks the finished garments. Note: the P06C02 and P06C03 configurations support up to 2 of the 3 modules simultaneously; all three run on P08C04 and P10C05.
⚠️ Important compatibility note (per ROQ factory spec): The P06C02 and P06C03 configurations support any 2 of the 3 automation modules (FEED, PEEL, PULL) simultaneously. The P08C04 and P10C05 configurations support all 3 modules simultaneously for a fully hands-free line. Pick your Impress config based on how much automation you plan to add — we’ll walk you through it at quote time.
🎯 The fully hands-free workflow (P08C04 / P10C05): Operator loads blank garment → FEED places transfer → Impress presses → PEEL removes backing → PULL removes and stacks finished garment. One operator only loads blanks — everything else is automated.
🧾 DTF Consumables You’ll Also Need
The 3 machines above are your production line — but every transfer also needs matched consumables. River City Supply is an authorized STS & CCI dealer and stocks everything you need to keep the XPD-924D running at full production speed:
💡 Note: STS XPD2 cartridges are required for printhead warranty coverage on the XPD-924D. Use only OEM inks — aftermarket ink voids the warranty.
Complete In-House DTF Production — End-to-End Control, Maximum Margins
This 3-machine combination is the most complete in-house DTF production line we sell, and the one that pays back fastest for shops serious about DTF fulfillment. Here’s why it works:
💰 Unbeatable Per-Piece Margins
Printing transfers in-house dramatically reduces your transfer cost compared to buying pre-made DTF from a vendor. On meaningful volume, the cost savings alone typically cover the monthly financing payment on the entire 3-machine setup.
⚡ Same-Day Turnaround Capability
No waiting on transfer suppliers. Design, print, shake, and press in one continuous workflow — rush orders become a competitive advantage instead of an operational headache.
🎨 Full Quality & Color Control
You control the print resolution, ink density, color calibration, and powder application — not some third-party transfer supplier with their own quality variance. Brand consistency across every order.
🏭 Scales to Any Volume
STS printer at 188 ft²/hr feeds the Impress at 600 pcs/hr. Absorb print-on-demand orders, wholesale contract decoration, custom retail programs, or brand fulfillment — all on the same line without capacity bottlenecks.
👤 1–2 Operator Workflow
The entire line runs with 1–2 operators instead of the 6–10 needed for equivalent output on manual equipment. Labor cost per transfer drops dramatically, and training a replacement operator becomes much simpler.
📦 Ideal Customer Profiles
Print-on-demand fulfillment operations · custom retail and corporate apparel programs · multi-brand contract decoration shops · team sports and numbering specialists · shops supplementing existing screen printing with full-color DTF capability.
Ready to spec a complete DTF production line? Call us and we’ll bundle all three machines into one quote with consolidated freight, coordinated installation, and a single financing application.
The Industry’s Only Named Equipment Warranty
Every ROQ Impress PRSS-IHPP06C03-L4 purchased through an authorized ROQ dealer is covered by the ROQ Solid Warranty. Standard coverage includes parts, labor, AND technician travel — the only named warranty in the automatic screen-print equipment industry. You don’t pay for the part, shipping, tech time, or travel costs when a ROQ technician needs to come onsite.
Coverage periods vary by configuration. Call us at (512) 454-0505 and we’ll send the current warranty PDF with your quote.
Finance Your ROQ Impress PRSS-IHPP06C03-L4 — Cash Flow Stays Intact
Equipment financing is available on every ROQ press through our financing partner. Section 179 tax advantages may apply for qualifying businesses — own the equipment outright with payments structured to fit your shop’s cash flow. Many shops find the automation productivity gains cover most of the monthly financing payment from the first production run.
Related Products & Complete Your Line
ROQ PEEL — Auto Film Removal →
Automation add-on that removes DTF backing film after pressing. Paired with FEED, automates most of the line.
Talk to a ROQ Expert
Speccing the right ROQ takes a real conversation — your production volume, shop footprint, color count goals, growth horizon, and workflow all factor into the build. Call, email, or chat with us — we’ll put together a complete ROQ Impress PRSS-IHPP06C03-L4 configuration, financing estimate, accessory package, and lead-time quote within 1 business day.
Technical Specifications
ROQ Impress PRSS-IHPP06C03-L4 — Complete Technical Specifications
| Specification | Detail |
|---|---|
| SKU / Part Number | PRSS-IHPP06C03-L4 |
| Configuration Code | P06C03 (L4 — 4 laser positioning markers) |
| Manufacturer | S.Roque Máquinas e Tecnologia Laser S.A. (ROQ) — Oliveira de S. Mateus, Portugal |
| Product Type | Automated carousel heat transfer press for DTF, screen transfers, vinyl, and specialty transfers |
| Number of Pallets (Stations) | 6 |
| Number of Heat Presses | 3 |
| Laser Positioning Markers | 4 (L4 designation) |
| Max Production Speed | Up to 500 pieces/hour |
| Max Pressing Area | 400 × 500 mm (16″ × 20″) per pallet |
| Diameter (Footprint) | 2,510 mm (8.2 ft) |
| Height | 1,926 mm (6.3 ft) |
| Total Weight | 665 kg (1,466 lb) |
| Air Consumption | 35.5 l/min (74.8 ft³/h) @ 6 bar work pressure, 7 bar supply |
| Operating Air Pressure | 3.5 bar operating · 6 bar work · 7 bar supply |
| Electric Consumption @ 3×230V | 35 A |
| Electric Consumption @ 3×400V | 21 A |
| Mixed Hot + Cold Press | Not available on this configuration (factory spec) — see P08C04 for optional mixed-press, or P10C05 for standard mixed-press |
| Control System | Programmable touchscreen — per-head pressure, temperature, dwell time, full recipe memory |
| Per-Head Controls | Individual keypad on each heat press head: Start · Stop · Rotate CW · Rotate CCW · Press |
| Platen Surface | Rubber top pallets — even pressure distribution across thick seams, pockets, uneven surfaces |
| Pressure Uniformization | Integrated pressure-uniformization function applied automatically by the heat press |
| Transfer Types Supported | DTF · screen print transfers · digital/screen hybrid · vinyl · HTV · twill · rhinestones · foil · cad-cut · player numbers |
| Automation Module Compatibility | Supports any 2 of 3 modules simultaneously: FEED, PEEL, PULL |
| Included Automation Modules | None — FEED, PEEL, PULL sold separately as add-on modules |
| Warranty | ROQ Solid Warranty — parts, labor, technician travel (confirm at quote) |
| Lead Time | 8–14 weeks built-to-order from Portugal |
| Country of Origin | Portugal (Oliveira de S. Mateus) |
Technical Sheets / Safety Data Sheets / Documents
FREQUENTLY ASKED QUESTIONS
Frequently Asked Questions
Reviews
You May Also Like
Related products
-
ROQ PEEL Automatic Film Removal Machine for Screen Printing
-
ROQ Impress P06C02-L4 Automatic Screen Printing Press – 2 Presses, 6 Stations, 4 Lasers
-
ROQ Impress P08C04-L4 Automatic Screen Printing Press – 4 Presses, 8 Stations, 4 Lasers
-
STS 24″ XPD-924D DTF Printer – Dual-Head Performance, Professional Output, High-Speed Production – FREE SHIPPING
$24,995.00
