Vastex PTF-100 DTF Powder Applicator – Automated Powder-To-Film System for Consistent, Clean DTF Transfers – FREE SHIPPING
Vastex
The Vastex PTF-100 DTF Powder Applicator is a purpose-built, automated DTF powder application system from Vastex International — a trusted name in professional screen printing equipment manufacturing for decades. Featuring a dual-cartridge design holding up to 3 lbs per cartridge, adjustable vibration timer, sturdy steel construction, and a clear polycarbonate viewing door, the PTF-100 delivers uniform TPU powder coverage, significantly reduced operator powder exposure, and minimal waste — in a purpose-built enclosure designed for films up to 16 x 20 inches.
$2,385.00
Description
Vastex DTF Powder Applicator — Screen Printing Equipment Expertise Meets DTF
Vastex International has been manufacturing professional screen printing equipment — presses, dryers, exposure units, and conveyor systems — for decades. The PTF-100 brings that same engineering discipline to the DTF workflow. This is not a repurposed consumer appliance or a converted food sealer — it was designed from the ground up for the specific demands of DTF powder application: uniform coverage, contained operation, reduced operator exposure, and consistent results batch after batch.
PTF-100 Key Features
The PTF-100 was engineered specifically for DTF hot-melt TPU powder application — not adapted from another application category. The internal geometry, vibration frequency, cartridge placement, and viewing door are all optimized for the unique requirements of evenly coating wet DTF ink with adhesive powder.
With two cartridges each holding up to 3 lbs (1.4 kg) of adhesive powder, the PTF-100 supports extended production sessions without refilling interruptions. The dual design also allows loading white powder in one cartridge and black in the other, enabling quick job-type switching without emptying and reloading.
The vibration timer controls exactly how long the PTF-100 agitates after dispensing powder — allowing you to tune coverage consistency for your specific film size, ink coverage density, and powder particle size. Once calibrated for your workflow, every run produces the same result without any operator variation.
The front-loading door is constructed from clear polycarbonate, giving operators full visibility into the powder chamber during operation without opening the enclosure and releasing airborne particles into the shop environment. Monitor the process safely from outside.
The PTF-100 housing is built from the same heavy-gauge steel Vastex uses in their screen printing presses and curing dryers — equipment designed to live on a production floor and withstand multiple shifts per day for years without structural fatigue.
Manual DTF powder dusting creates significant airborne powder that settles on equipment, floors, and operators — and gets breathed in. The PTF-100’s enclosed system contains powder during application, reducing airborne particles substantially and allowing excess powder that collects in the chamber to be recovered and reused.
See the Vastex PTF-100 in Action
PTF-100 vs. Manual Application vs. STS S-20 Auto Shaker
| Factor | Manual Dusting | Vastex PTF-100 | STS S-20 Auto Shaker |
|---|---|---|---|
| Powder uniformity | Variable — operator-dependent | Consistent every run | Consistent every run |
| Operator powder exposure | High — airborne particles | Significantly reduced | Built-in HEPA filtration |
| Max film size | Unlimited (messy) | Up to 16×20″ | Up to 24″ width |
| IR curing included | No | No — separate oven required | Yes — integrated IR |
| Best for | Very low volume | Desktop DTF shops | 24″ production systems |
| Powder waste recovery | Lost to floor / air | Collected for reuse | Collected for reuse |
Heat Press Application Guide
| Fabric | Temp | Dwell | Pressure | Peel | Notes |
|---|---|---|---|---|---|
| 100% Cotton | 300–320°F | 12–15 sec | Med-Firm | Cold | Best adhesion; most forgiving. |
| 50/50 Poly-Cotton | 305–315°F | 12–15 sec | Med-Firm | Cold | Most popular DTF substrate. |
| 100% Polyester | 275–295°F | 10–12 sec | Light-Med | Cold | Lower temp prevents dye migration. |
| Athletic / Performance | 275–295°F | 10–12 sec | Light | Warm | Stretches without cracking. |
| Nylon | 265–285°F | 10–12 sec | Light | Cold | Test on specific nylon type first. |
| Denim / Canvas | 305–315°F | 15–18 sec | Firm | Cold | Heavier weave needs longer dwell. |
Substrate & Fabric Compatibility
| Fabric | Compatibility | Pre-Treatment | Notes |
|---|---|---|---|
| 100% Cotton | Excellent | None | Best adhesion; ideal starting point |
| 50/50 Poly-Cotton | Excellent | None | Most popular DTF substrate |
| 100% Polyester | Excellent | None | Lower press temp; test for dye migration |
| Athletic / Performance | Excellent | None | Stretches and recovers without cracking |
| Nylon | Good | None | Lower temp; test on specific type |
| Denim / Canvas | Very Good | None | Longer press time for thick weave |
| Silk / Delicates | Not Recommended | — | Heat press temperatures damage delicate fibers |
Supplies to Pair with the PTF-100
Custom-blended hot-melt TPU adhesive powder. Compatible with the PTF-100’s dual cartridges.
Sheets and rolls for desktop DTF systems — ideal for the PTF-100’s 16×20″ capacity.
Wide-format DTF film for shops ready to scale up from desktop to production format.
Eco-friendly 13″ DTF film — fits within the PTF-100’s film size range.
Fully automatic 24″ IR shaker for shops scaling up to XPD-924D production volume.
Technical Specifications
| Specification | Detail |
|---|---|
| System Type | Powder application system for DTF direct-to-film printing |
| Film Capacity | Up to 16 x 20 inches (406 x 508 mm) |
| Dual Cartridge Capacity | Two cartridges — each holds approximately 3 lbs (1.4 kg) of adhesive powder |
| Vibration Control | Adjustable timer for precise vibration duration |
| Construction | Heavy-gauge steel case with clear polycarbonate viewing door |
| Powder Compatibility | Hot-melt TPU adhesive powder (white and black) |
| Curing | Not included — separate DTF curing oven required |
| Operator Safety | Enclosed design reduces airborne powder exposure vs. open hand-dusting |
| Powder Recovery | Excess powder collects in chamber for reuse |
| Manufacturer | Vastex International |
| Ventilation Required | Yes — work in ventilated area; PPE required |
| Shop Environment | 50–70% RH, 75–80°F recommended |
| Warranty | Vastex manufacturer warranty — contact RCS for details |
| Shipping | Free shipping from River City Supply, San Antonio, TX |
Technical Sheets / Safety Data Sheets / Documents
FREQUENTLY ASKED QUESTIONS
Frequently Asked Questions — Vastex PTF-100 DTF Powder Applicator
No — the PTF-100 applies DTF powder and removes excess through vibration, but does not include infrared heating to melt or cure the powder. A separate DTF curing oven is required after powder application. If you want an all-in-one powder application and curing system, see the STS S-20 Automatic Powder Shaker, which includes integrated top and bottom IR heating.
The PTF-100 handles films up to 16 x 20 inches (406 x 508mm). This makes it ideal for desktop DTF printers printing A3, A3+, or standard US letter and tabloid-size sheets. For 24-inch wide-format DTF film, you need a 24-inch powder shaker system like the STS S-20.
Yes — the dual cartridge design allows loading white powder in one cartridge and black powder in the other. White powder is standard for the vast majority of DTF applications. Black powder is used for specialty dark-on-dark applications where white powder might be visible through very thin or sheer dark fabrics. Having both loaded allows quick switching between job types.
The timer controls how long the PTF-100 vibrates after powder is dispensed onto the film. More vibration time removes more excess powder, producing cleaner edges. Less vibration may leave slightly more powder coverage for dense, heavily inked designs. Calibrate by running a few test prints at different timer settings and evaluating transfer edge quality and coverage consistency. Once dialed in, results are repeatable.
Yes — the PTF-100 is sized ideally for desktop DTF operations printing A4 to A3+ films. It is the logical upgrade from manual hand-dusting for shops doing consistent volume. If you are printing on a 24-inch wide-format DTF printer, you need a 24-inch shaker system instead.
The PTF-100 is designed for hot-melt thermoplastic polyurethane (TPU) adhesive powder in standard particle sizes — the universal adhesive for all DTF printing. Both white and black TPU powders are compatible. CCI DTF Adhesive Powder is a compatible option available at River City Supply.
Yes — the Vastex PTF-100 ships free from River City Supply in San Antonio, TX. Orders placed before 3:30 PM CT ship same day. Call (512) 454-0505 to confirm current availability and lead time.
Reviews
Only logged in customers who have purchased this product may leave a review.
You May Also Like
Related products
-
STS 1-Liter DTF Ink Cartridges – CMYK & White • USA-Made • Designed for the STS XPD-924D DTF Printer
Price range: $127.14 through $508.56 -
ROQ PEEL Automatic Film Removal Machine for Screen Printing
-
STS S-20 24″ Automatic DTF Powder Shaker – With Infrared Dryer & Built-In Air Purifier – Designed for XPD-924D – FREE SHIPPING
$13,782.00 -
ROQ Impress P08C04-L4 Automatic Screen Printing Press – 4 Presses, 8 Stations, 4 Lasers
Reviews