PMI #560 RED Screen Printers Tape 3 Inch | Made in USA | UV-Cured Adhesive Production Tape
PMI Tape
The PMI #560 RED Screen Printers Tape — 3″ × 60yd is PMI’s newest screen-printer tape — Made in the USA with a proprietary UV-cured adhesive on a red BOPP (biaxially oriented polypropylene) film backing. The soft adhesive is engineered to flow deeply into the mesh weave for higher adhesion applications (16 oz/in) while leaving no residue on removal for reclaim. Per PMI’s technical data sheet, the #560 RED is “compatible with all emulsion and ink types” — a true universal screen tape. This page is the 3″ width, 60-yard roll, sold as single rolls or full cases of 24 rolls per case. SKU PMI3560.
🇺🇸 Made in the USA
Manufactured by PMI Tape (Advanced Screen Technologies) at their facility in Noblesville, IN. American manufacturing, American supply chain. Not an import.
Proprietary UV-Cured Adhesive
PMI’s new adhesive technology is a proprietary UV-cured formulation — cross-linked at the factory using ultraviolet light. The soft chemistry flows deeply into the mesh weave for higher adhesion (16 oz/in), yet still releases cleanly with no residue on removal.
Red BOPP Film Backing
Biaxially Oriented Polypropylene (BOPP) film backing is dimensionally stable, doesn’t stretch under tension, and tears cleanly when snapped. Tensile strength 24.94 oz/in. Total product thickness 2.8 mil (2.0 mil backing + 0.8 mil adhesive).
This Page: 3″ × 60yd
This product is the 3″ width, 60-yard roll. Frame channel masking + mesh edge sealing in one strip — the 3″ width is the production-shop standard. One strip of 3″ covers the frame channel AND extends onto the mesh edge with proper margin, eliminating the need for a second pass with a narrower tape. Sold as single rolls or full cases of 24 rolls. SKU PMI3560.
Compatible With ALL Inks and Emulsions
Per PMI’s tech sheet: “PMI RED Tape is compatible with all emulsion and ink types.” One tape that works across plastisol, water-based, discharge, HSA, UV inks, and every common stencil chemistry.
Bold Red Color for Color-Coded Workflows
Red BOPP film visually distinguishes red-taped screens from your standard white or split-taped screens. Use to mark active production screens, designate water-based vs plastisol screens, flag VIP jobs, or upgrade your screen-room photography.
Need a different width? The PMI #560 RED Tape is also available in PMI #560 RED Tape 2″ × 60yd and PMI #560 RED Tape 4″ × 60yd.
In stock and ships same-day from RCS San Antonio, TX · FREE shipping on orders over $200 · Fastest way to reach us: Tidio chat on this page, or email [email protected]
Price range: $12.99 through $8,244.00
Description
★ NEW from PMI3″ × 60yd · SKU PMI3560
PMI #560 RED Screen Printers Tape — 3″ × 60yd
🇺🇸 Made in the USA · Proprietary UV-Cured Adhesive · BOPP Red Film · Universal Performance · All Inks · All Emulsions
The PMI #560 RED Tape is PMI Tape’s newest product — Made in the USA at PMI’s Noblesville, IN facility — and it represents a real breakthrough in screen-printer tape technology. PMI engineered a brand-new proprietary UV-cured adhesive on a red BOPP (biaxially oriented polypropylene) film backing. The soft adhesive is designed to flow deeply into the mesh weave for superior sealing in applications where higher adhesion is required, yet still leaves no residue on removal for reclaim. The result is the first PMI tape engineered as a true universal solution: one tape that works consistently across all ink types, all emulsion systems, all humidity levels, and all shop temperatures.
★ Made in the USA
UV-Cured Adhesive
BOPP Red Film
16 oz/in Adhesion
3″ width
UV-Cured Adhesive
BOPP Red Film
16 oz/in Adhesion
3″ width
► SEE IT IN ACTION
PMI Tape’s official product demonstration videos
Watch how the new UV-cured adhesive behaves — how it flows into the mesh, how cleanly it peels, and how it performs in real screen-room conditions:
If the videos don’t load, watch them at youtu.be/huUhSlKABNg and youtu.be/jjfRT2uUijE or visit pmitape.com/redtape for the full product page.
Why the 3″ Width?
The 3″ PMI #560 RED is the workhorse of the line and the size that production shops burn through fastest. One strip of 3″ tape covers the inside of a standard aluminum or roller frame channel AND extends a clean inch onto the mesh edge — in one pass, no second strip needed. If your shop is running 20×24 or 23×31 frames as your standard production size (which is most textile and graphic shops in North America), the 3″ #560 RED is the right primary width to stock.
Best for at this width:
The production workhorse width — covers frame channel masking and mesh edge sealing in a single strip on standard 20×24 and 23×31 production frames. The most-stocked PMI tape width in working shops.
Need a different width? The PMI #560 RED is available in three sizes:
PMI #560 RED Tape 2″ × 60yd →
PMI #560 RED Tape 4″ × 60yd →
What Makes the PMI #560 RED’s Adhesive Different
This is the part that matters: the #560 RED is not the same construction as PMI’s 451 Split or 451FA Full Adhesive tapes with a red pigment swapped in. PMI engineered a completely new adhesive system for this product — a proprietary UV-cured adhesive on a red BOPP film backing, with adhesion measured at 16 oz/in and tensile strength at 24.94 oz/in. Per the PMI Technical Data Sheet, “PMI RED Tape has a soft adhesive which is designed to flow well into the mesh. This allows the tape to work well in applications where a higher adhesion is required. This soft adhesive is also designed to leave no residue when removed for reclaim.” Here’s what that delivers:
Proprietary UV-Cured Adhesive Flows Into the Mesh
PMI’s new adhesive is a proprietary UV-cured formulation — not a standard pressure-sensitive acrylic or rubber adhesive. The soft chemistry has the flow characteristics needed to penetrate deeply into the mesh weave during application, creating mechanical interlock between the tape and the mesh threads. This is what delivers the higher adhesion needed for applications where standard tape would lift mid-run.
Leaves NO Residue on Reclaim — The Engineering Trick
Despite the deep mesh flow, the UV-cured cross-linking means the adhesive bonds firmly during the run but releases cleanly on removal. According to PMI’s own tech sheet: “designed to leave no residue when removed for reclaim.” You get the seal of an aggressive adhesive AND the clean removal of a low-tack tape — previously these were trade-offs.
16 oz/in Adhesion Strength
Per the PMI Technical Data Sheet, the #560 RED measures 16 oz/in adhesion — substantially higher than standard pressure-sensitive screen tape. This is the spec that matters for shops running long automatic press runs with water-based, discharge, or HSA inks where weaker tapes lift partway through.
24.94 oz/in Tensile Strength
The red BOPP (biaxially oriented polypropylene) film backing tests at 24.94 oz/in tensile strength. BOPP is dimensionally stable, doesn’t stretch under tension during application, and tears cleanly when you snap or scissor-cut it at the end of a tape run. Won’t shred, fray, or split.
Compatible With All Inks AND All Emulsions
PMI’s tech sheet states directly: “compatible with all emulsion and ink types.” Tested across plastisol, water-based, discharge, HSA, and UV inks; releases cleanly from PVA-SBQ photopolymer, diazo, dual-cure, and capillary film stencils.
Made in the USA
Manufactured by PMI Tape (Advanced Screen Technologies, Inc.) in Noblesville, IN. American-made adhesive technology, American manufacturing, supporting American screen-print supply distribution. Not an import.
One Tape, All Conditions — The Universal Positioning
PMI Tape’s positioning for the #560 RED is direct: this is engineered to be the only screen tape you need to stock. Here are the four variables that historically force shops to stock multiple tapes, and how the #560 RED handles each:
| Variable | Why It Usually Forces a Tape Swap | How the #560 RED Handles It |
|---|---|---|
| Ink Type | Plastisol is forgiving on tape; water-based and discharge soak into traditional adhesives; UV inks can degrade certain adhesives during cure cycles; HSA chemistry attacks rubber-based adhesives | New adhesive resists water absorption AND UV ink chemistry AND solvent attack. One tape works for plastisol, water-based, discharge, HSA, and UV inks with no performance trade-off |
| Emulsion Type | Some tape adhesives lift photopolymer stencils on removal; others leave residue on diazo or dual-cure stencils; capillary film is especially delicate | Releases cleanly from PVA-SBQ photopolymer, diazo, dual-cure, and capillary film without lifting stencil pieces |
| Humidity | Traditional adhesives soften and slip in high summer humidity; get brittle and lose tack in dry winter conditions. Many shops swap tapes seasonally | Formulated for consistent performance across both humidity extremes — stays pliable in dry conditions, resists moisture absorption in humid conditions |
| Shop Temperature | Traditional pressure-sensitive adhesives have a narrow optimal temperature range. Cold morning startups slow the initial tack; hot afternoon production runs near dryers and flash units soften the bond | Adhesive maintains consistent bond strength across the typical shop temperature range — from cool 60°F startups to hot 95°F production afternoons |
The inventory simplification opportunity
If your shop currently stocks different tapes for different ink types, different seasons, or different production conditions, the #560 RED is positioned to consolidate that inventory. One SKU per width instead of multiple specialized tapes. Less screen-room clutter, fewer reorder decisions, simpler training for new crew members.
Why Red? The Color-Coded Workflow Bonus
Beyond the new adhesive technology, the bold red color gives you a secondary benefit: visual differentiation in the screen room. PMI’s standard tape colors (white, blue-stripe split, clear quick rip) all look similar across a screen rack. The #560 RED’s color enables color-coded workflows:
Color-Coded Production Workflow
Mark active production screens vs screens being held for the next job. Crew can instantly tell which screens are “hot” without checking job sheets.
Designate Ink-Type Screens
Many shops keep dedicated screens for water-based or discharge work to prevent plastisol contamination. Red tape on water-based screens, standard PMI white on plastisol screens.
Flag VIP Customer or Rush Jobs
Some shops use red tape to mark VIP customer screens, rush jobs, or screens reserved for repeat-order brands. The color stays visible across the entire screen rack.
Premium Shop Branding & Photography
Red-taped screens photograph dramatically better than white-taped screens for shop social media content. Also signals attention to detail during customer walkthroughs.
The Full PMI Screen Printer Tape Line — Which Tape for Which Job
PMI Tape (Advanced Screen Technologies, Inc.) makes a complete family of tapes engineered specifically for screen printing. Each tape has a specific application in the screen room. Here’s the full lineup:
| PMI Tape | What It’s For | Key Benefits | Widths & Product Pages |
|---|---|---|---|
| ★ PMI #560 RED Tape NEW | Universal screen tape — engineered for all inks, emulsions, humidity, and temperatures. Same construction across all widths. | NEW proprietary UV-cured adhesive wets deeply into mesh for superior seal yet peels clean. Bold red color enables color-coded workflows. Inventory simplification opportunity. | 2″: View → 3″: You are here 4″: View → |
| PMI 451 Split Tape | Masking the inside of frame channels — aluminum, wood, and roller frames where the channel/well requires a defined non-adhesive zone | Patented dual-zone construction: blue non-adhesive stripe sits against the frame channel, clear adhesive stripe bonds to mesh. One-pull clean removal, no solvents needed | 2″: View → 3″: View → 4″: View → |
| PMI 451FA Full Adhesive Tape | Taping further into the screen, print-side blockout work, masking wood frames — where full-width adhesion is preferred over the split-zone design | Same backing and adhesive as PMI 451 Split, but full-width adhesive (no blue stripe). Maximum coverage and bond strength when you don’t need the non-adhesive zone | 2″, 3″, 4″ (60yd rolls) View 451FA → |
| PMI 321 Blockout Tape (White) | Blocking out open mesh areas, sealing pinholes, masking off registration marks, covering large areas not covered by emulsion | Fully adhesive, hand-tearable white vinyl. Strong tack for full mesh coverage. 110-yard rolls — longest in the PMI line. Residue-free removal | 2″: View → 3″: View → |
| PMI 260 Quick Rip (No Blue Liner) | Print-side blockout, covering pinholes, masking registration marks, fast snap-tear application on the print side of the screen | Fully clear, 100% adhesive, hand-tearable. Print directly on the tape for color registration tests. Linerless — fastest application of any PMI tape | 2″ (60yd roll) View Quick Rip 260 → |
| PMI #918 Registration Tape | Multi-color registration setup — print on the tape, wipe off, realign, reprint until colors register correctly | 16″ wide clear polyethylene with removable adhesive. Saves shirts during multi-color job setup. Ink wipes off cleanly so you can reuse the same tape multiple times during registration | 16″ × 200′ roll View Registration Tape → |
| PMI Tape Dispenser | Heavy-duty steel tape dispenser for all PMI screen-printer tapes up to 4″ wide rolls — including the new #560 RED | Elevated cutting edge for clean tears, weighted base, mountable, tool-free roll replacement | Holds rolls up to 4″ wide View Dispenser → |
| PMI PalletGel Adhesive Sheets | Replaces both spray adhesive AND pallet tape on the press — double-sided gel sheet holds garments without spray fumes | 15.5″×21″ gel sheet rated for 100,000 impressions. Built-in green-to-yellow heat indicator at 120°F. Cleans with water and a scrub pad. Made in USA by PMI since 1990 | 15.5″×21″ sheet View PalletGel → |
How to Apply the PMI #560 RED Tape Like a Pro
The application process is similar to any PMI screen-printer tape, but step 4 (smoothing down) is more important than ever with the new adhesive — firm pressure is what activates the deep mesh wet-out that gives the #560 RED its universal performance:
FREE SHIPPING ON ORDERS OVER $200
PMI #560 RED Tape (3″) ships same-day from San Antonio, TX
Questions about which width to start with? Want to consolidate your current tape inventory? Got questions about the new UV-cured adhesive technology? Chat with us — we’ll help you switch to the #560 RED the right way.
Fastest way to reach us:
Technical Specifications
Product Identification
| Specification | Value |
|---|---|
| Product Name | PMI #560 RED Screen Printers Tape — 3″ × 60yd |
| SKU | PMI3560 |
| Width | 3″ |
| Roll Length | 60 yards (180 ft) |
| Rolls Per Case | 24 rolls/case |
| Case Dimensions & Weight | 9″ × 15″ × 14″ · 15 lbs per case |
| Manufacturer | PMI Tape (Advanced Screen Technologies, Inc.) |
| Distributor | River City Supply (San Antonio, TX) — distributing PMI tape since 2008 |
| Status | NEW from PMI — latest addition to the PMI screen printing tape family with all-new UV-cured adhesive technology |
| Minimum Order Quantity | 1 case (cases sold whole) |
| Lead Time | Stock product at PMI — short lead times |
| Country of Origin | 🇺🇸 Made in the USA — Noblesville, IN |
| Technical Data Sheet | Download PMI #560 RED Tape TDS (PDF) → |
| Safety Data Sheet | Download PMI #560 RED Tape SDS (PDF) → |
| Manufacturer Videos | Video 1 · Video 2 · pmitape.com/redtape |
Material & Construction (from PMI Technical Data Sheet)
| Component / Spec | Value |
|---|---|
| Backing Material | Red BOPP (Biaxially Oriented Polypropylene) Film — dimensionally stable, tears cleanly, won’t stretch under tension during application |
| Adhesive Type | Proprietary UV-Cured Adhesive — soft formulation designed to flow into mesh for higher adhesion applications; leaves no residue on removal for reclaim |
| Total Product Thickness | 2.8 mil |
| Adhesive Thickness | 0.8 mil |
| Backing Thickness | 2.0 mil |
| Adhesion | 16 oz/in — substantially higher than standard pressure-sensitive screen tape |
| Tensile Strength | 24.94 oz/in |
| Adhesive Coverage | Full width (continuous adhesive across the entire tape width) |
| Liner | Linerless construction (no release paper) |
| Tear Properties | Hand-tearable when started with a fingernail or razor; tears cleanly without shredding |
| Removal | Residue-free clean removal; no solvent required; emulsion-safe across all common stencil types |
| Country of Origin | 🇺🇸 Made in the USA — manufactured by PMI Tape (Advanced Screen Technologies, Inc.) in Noblesville, IN |
Ink & Solvent Compatibility
| Compatible With | Rating | Notes |
|---|---|---|
| Plastisol inks | ✓ Excellent | Full bond strength through long automatic press runs; clean removal |
| Water-based & discharge inks | ✓ Excellent | New adhesive resists water absorption — maintains seal against water-based and discharge formulas without lifting |
| HSA (high solid acrylic) inks | ✓ Excellent | Holds up to HSA ink chemistry and the heat from associated curing |
| UV inks | ✓ Excellent | Adhesive resists UV ink chemistry; tape removes cleanly after UV cure cycles |
| Cured emulsion / stencil | ✓ Excellent | Emulsion-safe across PVA-SBQ photopolymer, diazo, dual-cure, and capillary film |
Technical Sheets / Safety Data Sheets / Documents
Technical Sheets / Safety Data Sheets / Documents
📄
Technical Data Sheet (TDS)
Construction specs, adhesion ratings, tensile strength, and material details.
⚠️
Safety Data Sheet (SDS)
OSHA-compliant safety information, handling guidelines, and shipping classification.
PMI Tape’s official documentation linked above covers all the construction specs, adhesion data, material details, and safety information. Questions? The fastest way to reach us is Tidio chat (the widget on this page), or email [email protected].
Other PMI #560 RED Widths & Related PMI Tape Products
- PMI #560 RED Tape 2″ × 60yd →
- PMI #560 RED Tape 4″ × 60yd →
- PMI 451 Split Tape 2″ →
- PMI 451 Split Tape 3″ →
- PMI 451 Split Tape 4″ →
- PMI 451FA Full Adhesive Tape →
- PMI 321 Blockout Tape 2″ →
- PMI 321 Blockout Tape 3″ →
- PMI 260 Quick Rip Tape 2″ →
- PMI #918 Registration Tape →
- PMI Tape Dispenser →
- PMI PalletGel Adhesive Sheets →
Category Pages & Resources
- 📄 PMI #560 RED Tape Technical Data Sheet (PDF) →
- ⚠️ PMI #560 RED Tape Safety Data Sheet (PDF) →
- ► PMI #560 RED Demonstration Video 1 (YouTube) →
- ► PMI #560 RED Demonstration Video 2 (YouTube) →
- PMI Tape Manufacturer Product Page (pmitape.com/redtape) →
- All Screen Printing Tapes →
- All Screen Printing Emulsions →
- All Brands We Distribute →
- Emulsion Troubleshooting Guide →
Need help picking PMI tapes for your shop? Fastest way to reach us is Tidio chat (the widget on this page) or email [email protected] — you can also call (512) 454-0505.
FREQUENTLY ASKED QUESTIONS
Frequently Asked Questions
Why should I order the 3″ width specifically?
Frame channel masking + mesh edge sealing in one strip — the 3″ width is the production-shop standard. One strip of 3″ covers the frame channel AND extends onto the mesh edge with proper margin, eliminating the need for a second pass with a narrower tape. If your shop’s primary need doesn’t match the 3″ width, see the PMI #560 RED Tape 2″ × 60yd or PMI #560 RED Tape 4″ × 60yd product pages.
Where is the PMI #560 RED Tape made?
Made in the USA — manufactured by PMI Tape (Advanced Screen Technologies, Inc.) at their facility in Noblesville, IN. American manufacturing, American supply chain, supporting American screen-print supply distribution.
What makes the PMI #560 RED Tape different from other PMI tapes?
The #560 RED uses a proprietary UV-cured adhesive on a red BOPP (biaxially oriented polypropylene) film backing — this is not the same adhesive or backing used in the PMI 451 Split Tape or 451FA Full Adhesive. Per the official PMI Technical Data Sheet, the adhesive is “designed to flow well into the mesh” for higher-adhesion applications, while still leaving no residue on removal. The new adhesive measures 16 oz/in adhesion and the BOPP backing has 24.94 oz/in tensile strength.
What is BOPP film, and why does it matter?
BOPP stands for Biaxially Oriented Polypropylene — a film stretched in both directions during manufacturing to create dimensional stability. BOPP doesn’t stretch under tension during application, tears cleanly when snapped or scissor-cut, and resists shredding. The red BOPP film backing on the #560 RED has measured tensile strength of 24.94 oz/in — meaning it stays put on the screen, won’t deform under press conditions, and removes cleanly when you peel it after the run.
How does the UV-cured adhesive work?
The adhesive is a proprietary UV-cured formulation — cured at the factory using ultraviolet light to cross-link the chemistry, rather than air-drying or solvent-evaporating like traditional pressure-sensitive adhesives. The result is a soft adhesive that flows deeply into the mesh weave during application (creating mechanical interlock with the mesh threads), but releases cleanly on removal because the cure profile prevents the adhesive from bonding permanently to the mesh material. Higher initial adhesion (16 oz/in) AND clean residue-free removal.
What are the dimensions of the 3″ case?
The 3″ case ships with 24 rolls, each 60 yards long. Case dimensions are 9″ × 15″ × 14″ and total case weight is 15 lbs — ships UPS Ground for most US destinations.
Is the #560 RED a replacement for PMI’s other tapes?
Not a complete replacement — the other PMI tapes still have specific advantages. PMI 451 Split Tape is still the best choice when you need a defined non-adhesive zone against the frame channel. PMI 321 Blockout Tape in 110-yard rolls is still the most cost-effective option for large blockout areas. PMI 260 Quick Rip is still the fastest hand-tear print-side tape. The #560 RED is the new universal option when you want one tape that works across all conditions.
Does the UV-cured adhesive leave residue on my mesh?
No — per the official PMI Technical Data Sheet: “This soft adhesive is also designed to leave no residue when removed for reclaim.” Despite the deep mesh wet-out and the 16 oz/in adhesion strength, the UV-cured cross-linking means the adhesive bonds during the run but releases cleanly when you peel it for reclaim.
Will the #560 RED work in my humid summer shop conditions?
Yes — the proprietary UV-cured adhesive maintains bond strength across the humidity range that typical screen-print shops experience. Traditional pressure-sensitive adhesives soften and slip in high humidity (especially with water-based inks where the mesh is constantly wet). The #560 RED’s UV-cured chemistry doesn’t absorb water the way standard adhesives do.
Does the #560 RED work with water-based and discharge inks?
Yes — per PMI’s tech sheet: “PMI RED Tape is compatible with all emulsion and ink types.” This includes water-based, discharge, plastisol, HSA, and UV inks. The UV-cured adhesive resists water absorption while still maintaining clean release on reclaim — particularly valuable for shops running water-based or discharge work as their primary ink system.
Is the #560 RED emulsion-safe?
Yes — per PMI’s tech sheet, it’s “compatible with all emulsion and ink types.” The adhesive releases cleanly from cured emulsion without pulling pieces of the stencil off the mesh. Tested with PVA-SBQ photopolymer, diazo, dual-cure, and capillary film stencils.
Will the red color transfer onto my mesh or stencil?
No. The red color is the BOPP film itself — it’s pigmented into the polypropylene during manufacture, not a coating or surface dye. It won’t transfer, bleed, or stain the mesh, emulsion, or your prints.
Why use red tape instead of white?
The red color enables color-coded screen room workflows: mark active production screens vs screens being held, designate water-based vs plastisol dedicated screens, flag VIP customer or rush jobs at a glance. Red also photographs dramatically better than white for shops sharing behind-the-scenes content on social media.
Do I need a special dispenser?
You don’t need one — but the PMI Tape Dispenser makes daily taping much faster. It holds rolls up to 4″ wide, including the 3″ #560 RED.
Where can I see the PMI #560 RED in action?
PMI Tape has two demonstration videos: Video 1 and Video 2. Both are embedded in the Description tab above. Also see the full PMI product page at pmitape.com/redtape.
Where can I download the Technical Data Sheet and Safety Data Sheet?
Both PMI #560 RED Tape documents are available as PDFs: Download TDS → (construction specs, adhesion ratings, tensile strength, material details) and Download SDS → (OSHA safety information, handling guidelines, shipping classification).
Is shipping really same-day?
Yes — the PMI #560 RED Screen Printers Tape — 3″ × 60yd ships from our San Antonio, TX warehouse when in stock. Orders placed before 3:30 PM Central Time on a business day typically ship the same day. FREE shipping on orders over $200.
Questions About the 3″ PMI #560 RED Tape?
Ordering for a new shop? Switching from your current tape? Have questions about the new adhesive? RCS has distributed PMI tape products since 2008.
Fastest way to reach us:
Reviews
You May Also Like
Related products
-
PMI Quick Rip 3″ Tape – Fast, Residue-Free Screen Printing Tape for Easy Masking
Price range: $12.95 through $4,358.00 -
Polyken #221 Cloth Tape 2″ Width – Durable and Versatile Adhesive Cloth Tape
$35.00 -
Sale!
PMI 321 3″ Blockout Tape – The Ultimate Residue-Free Tape for Screen Printing
Price range: $0.00 through $3,628.80 -
Printers Choice 7160 18” Wide Roll White Transfer Pallet Tape – Premium Screen Printing Application Tape
$89.99
