Visprox Fast PAD Thinner VVD-2 (Thinner 2) for TCP 9900
TW Graphics
Visprox Thinner 2 (VVD-2 Fast PAD) is the fast-evaporating thinner for TCP 9900 pad printing ink — chosen when you need crisp pad pickup, sharp ink film release, and minimal time between pad pickup and substrate transfer.
Thinner 2 evaporates faster than Thinner 10, making it the right choice for high-speed automated pad printing, fine-detail work where ink must dry-in-place quickly on the cliché, and ambient conditions where standard thinners flow too slowly off the pad.
Part of the Visprox TCP 9900 pad printing ink system manufactured by TW Graphics in Commerce, California, USA. SKU: VXTH2L1. Pack size: 1 Liter. Compatible with the full TCP 9900 ink range (Colormatic mixing colors A through K, Extra Opaque whites and blacks, and TCP 9949 Transparent Base) for one-component (1K) and two-component (2K) pad printing on PVC, ABS, polycarbonate, acrylic (PMMA), polystyrene, PES, PET-G, pre-treated polypropylene, aluminum, and glass — covering industries from cosmetics packaging and medical devices to electronics, automotive trim, and promotional products.
$87.00
Description
Fast-evaporating thinner for crisp pad pickup and quick dry-in-place printing
Visprox Thinner 2 (VVD-2 Fast PAD) is the fast-evaporating thinner for TCP 9900 pad printing ink — chosen when you need crisp pad pickup, sharp ink film release, and minimal time between pad pickup and substrate transfer.
🇺🇸
🔬
⏱️
Why Choose This Product
Press & Substrate Tuning
Adjusts TCP 9900 ink viscosity to match your press speed, ambient conditions, and substrate — proper viscosity is the foundation of consistent prints.
Evaporation-Profiled
This thinner runs fast — chosen specifically to balance pad pickup, image release, and dry-in-place behavior.
TCP 9900 System Match
Formulated as part of the Visprox TCP 9900 system — chemically matched to the ink resin for clean reduction without affecting cure or color.
Made in California by TW Graphics
Manufactured by TW Graphics in Commerce, California — domestic U.S. production with no overseas lead times.
What’s Included
- ✓One 1 Liter container of Visprox Fast PAD Thinner VVD-2 (Thinner 2) for TCP 9900 (SKU: VXTH2L1)
- ✓Manufacturer technical data sheet (TDS) and safety data sheet (SDS) available on request
- ✓Lot number and batch traceability for production quality control
- ✓Live chat, phone, and email support from River City Supply’s pad printing specialists
See Pad Printing in Action
A demonstration of pad printing — how silicone pads pick up ink from etched clichés and transfer it onto curved, textured, or three-dimensional substrates.
Production Specifications at a Glance
Application Rate
Add to TCP 9900 ink as needed to reach desired viscosity for your printer and substrate
Storage
Sealed in original container, away from heat and ignition sources, 15–30°C ambient.
Compatibility
All TCP 9900 colors and EO/L/M variants. Also compatible with Visprox cleaner 920.
Mixing Order
Add hardener first (if running 2K), then adjust viscosity with thinner. Never thin before adding hardener.
Background & Context
Pad Printing 101
Pad printing transfers ink from an etched plate (cliché) to a silicone pad, then to the substrate. The pad picks up ink only because the ink has flashed off enough solvent on the cliché to be tacky — but not so much that it won’t release onto the substrate. Thinner controls that balance.
Thinner vs. Retarder
A thinner reduces viscosity AND evaporates relatively quickly. A retarder reduces viscosity AND deliberately slows evaporation. Use thinner to set baseline viscosity; add retarder if ink dries on the cliché between cycles.
Common Mistakes
Over-thinning is the #1 mistake — it weakens hide power, opens halftones, and can compromise adhesion. Start with small additions (5%), test, adjust. And never re-thin ink that’s already been hardened.
Choosing the Right Hardener by Substrate
Use this guide to select the correct two-component hardener for your substrate. Always test on actual production parts before running a job.
| Substrate | Hardener | Addition | Cure |
|---|---|---|---|
| PVC, ABS, PS | 1K (no hardener) | — | Air dry |
| PMMA, PES, PET-G | 1K (no hardener) | — | Air dry |
| Polycarbonate (PC) | 1K, optional N.2 | 0–5% | Air dry |
| Polyester / PET | Polyester Bonding Improver | Up to 20% | Air dry |
| Pre-treated Polypropylene (PP) | Hardener N.2 | Up to 10% | Air dry |
| Glass (high-cure) | Hardener N.5 | 20% | 150°C / 20 min |
| Glass (low-percentage) | Hardener N.9 | 6% | 150°C / 20 min |
How to Use This Product
A step-by-step workflow for safe, repeatable pad printing results. New to TCP 9900? Open live chat with the bubble in the bottom corner — fastest way to get questions answered before you start a job.
Mix Ink First
Stir TCP 9900 ink thoroughly before adding any thinner — pigments settle in storage and need to be fully redispersed.
Add Hardener (If Required)
If running 2K (PP, glass, metal substrates), add hardener BEFORE thinner. Never thin before hardening.
Start Small — 5%
Add 5% thinner by weight to begin. You can always add more; you can’t take it out.
Mix Thoroughly
Stir until fully uniform. Inconsistent thinning produces inconsistent prints.
Test Print
Run 5–10 test impressions on actual production substrate. Check coverage, edge sharpness, and pad release.
Adjust If Needed
If ink is too thick (poor pickup, gummy release), add another 2–3%. If too thin (open halftones, weak hide), the batch may be over-thinned — start fresh.
Run Production
Once dialed in, document the ratio for your build sheet. Re-thin only when needed (typically every 30–60 minutes on long runs as solvent evaporates from the inkwell).
Clean Up With Cleaner 920
When done, clean equipment with Visprox Cleaner 920 (NCL920L5) — not thinner. Thinner residue can contaminate the next color run.
Safety, Handling & Regulatory
Important Notes
Always test ink/thinner ratios and full adhesion on actual production substrates before running a paid job.
Start with small thinner additions (5%) — over-thinning weakens hide power, opens halftones, and can compromise adhesion.
Hot, dry shops dry ink faster on the cliché. Adjust thinner choice (or add retarder) seasonally as conditions change.
Shipping & Lead Time
Visprox TCP 9900 inks are batch-mixed at TW Graphics in Commerce, California at the time you place your order — never pulled from pre-mixed inventory sitting on a warehouse shelf. You receive the freshest possible product with maximum pot life every time.
Allow 3–4 business days total from your order to delivery — that includes the fresh-mix production time at the manufacturer plus standard ground shipping. Free shipping over $200; drop-ship items count toward the threshold. Need it faster? Click the live chat bubble for rush options.
TW Graphics manufactures the Visprox TCP 9900 line domestically in California. Every order ships with full lot and batch traceability — no overseas customs delays, no stale-inventory concerns, and quality you can audit back to the production run.
Browse the Full Visprox TCP 9900 Color Range
Click any color to view its product page. The Colormatic mixing system (letters A through K) lets you mix any Pantone color from the 9 base primaries plus White L and Black M. The currently-viewed product is highlighted in amber.
Compatible Additives & Auxiliaries
Complete the Visprox TCP 9900 system with the right hardener for your substrate, the right thinner for your press speed, and Retarder 4 when you need to slow ink dry on fine-detail clichés or in hot pressroom conditions.
| Type | Product | What It Does | Application | Size | |
|---|---|---|---|---|---|
| Hardener | Hardener N.2 | Two-component hardener for adhesion to pre-treated polypropylene and difficult plastics | Up to 10% by weight added to TCP 9900 ink before any thinning | 0.5 kg | View Product → |
| Hardener | Hardener N.5 | Two-component hardener for high-cure adhesion to glass and ceramics | 20% by weight added to TCP 9900 ink | 0.5 Liter | View Product → |
| Hardener | Hardener N.9 | Low-percentage two-component hardener for glass — economical, high-cure adhesion | 6% by weight added to TCP 9900 ink | 0.1 Liter (100 mL) | View Product → |
| Thinner | Fast PAD Thinner VVD-2CURRENT | Fast-evaporating thinner for crisp pad pickup and quick dry-in-place printing | Add to TCP 9900 ink as needed to reach desired viscosity for your printer and substrate | 1 Liter | View Product → |
| Thinner | Thinner 10 | Standard medium-speed thinner — the everyday choice for TCP 9900 viscosity adjustment | Add to TCP 9900 ink as needed to reach desired viscosity for your printer and substrate | 1 Liter | View Product → |
| Retarder | Retarder 4 | Slow-evaporating retarder for fine-detail work and longer working time on the pad | Add to TCP 9900 ink in small percentages (typically 2–10%) to slow evaporation | 1 Liter | View Product → |
Frequently Bought Together
What other customers typically order alongside this product to run a complete TCP 9900 system.
| Extra Opaque Black | 1 Liter | Add to Order → | |
| Extra Opaque White | 1 Liter | Add to Order → | |
| Hardener N.2 | 0.5 kg | Add to Order → |
Talk to a Pad Printing Specialist
River City Supply has been distributing pad printing inks, presses, and chemistry since 2008. Not sure which TCP 9900 color, hardener, or thinner is right for your job? Reach out — our specialists will help you spec the right system the first time.
Product information last reviewed November 2026 • Specifications subject to change — request current data sheet via live chat for production-critical applications.
Technical Specifications
Technical Specifications
Reference data drawn from the manufacturer’s TCP 9900 technical data sheet. For application-specific advice, click the live chat bubble for fastest response.
| Specification | Value |
|---|---|
| Product Type | Solvent thinner for TCP 9900 pad printing ink |
| Brand | Visprox by TW Graphics |
| Distributor | TW Graphics |
| Manufacturer Part Number | VXTH2L1 |
| Evaporation Profile | Fast |
| Compatible Ink | Visprox TCP 9900 (all colors and EO/L/M variants) |
| Application Rate | Add to TCP 9900 ink as needed to reach desired viscosity for your printer and substrate |
| Use Case | All TCP 9900 colors; preferred for fast-cycle production |
| Pack Size | 1 Liter |
| Mixing Order | Add hardener first (if 2K), then adjust viscosity with thinner |
| Storage Temperature | 15–30°C (59–86°F) |
| Shelf Life (sealed) | 2 years from manufacture |
| Country of Origin | United States — Commerce, California |
| Ships From | TW Graphics manufacturing facility — Commerce, California (fresh-mixed when ordered) |
| Lead Time | 3–4 business days from order to delivery (fresh-mixed at the manufacturer + ground shipping) |
