River City Glitter Neon Aqua HTV | 20″ Wide Glitter Heat Transfer Vinyl
River City Graphic Supply
River City Glitter Neon Aqua is a vivid, cool-toned glitter that anchors team colors and calm, polished designs. A textured, single-layer glitter HTV that presses in one pass for maximum sparkle with no shedding.
Bold Sparkle
Dense, textured glitter that shines
Single-Layer Shine
Big impact from one cut-and-press layer
20″ Wide
Sold by the yard off the roll
Warm Peel
Presses at 320°F, medium pressure
Same-day shipping on in-stock orders before 3:30 PM CT • Free shipping over $200 • Free San Antonio pickup
Original price was: $13.00.$5.00Current price is: $5.00.
Description
River City Glitter Neon Aqua Heat Transfer Vinyl
River City Glitter Neon Aqua is a vivid, cool-toned glitter that anchors team colors and calm, polished designs. This textured, single-layer glitter heat transfer vinyl uses the same premium glitter material and application as the top national brands – it presses in one pass for maximum sparkle with no shedding, and holds its shine wash after wash.
Maximum Sparkle
A dense, textured glitter finish that catches the light from every angle.
No Shedding
Solid glitter film – all the sparkle with none of the loose-glitter mess.
Single-Layer Shine
Big, bold impact from one cut-and-press layer. Great as a top layer over Smooth HTV.
Durable Finish
Holds its sparkle through repeated wear and washing when applied correctly.
Design Ideas for Glitter Neon Aqua
Team and school colors
Nautical and collegiate looks
Nature and outdoor themes
Corporate and club logos
Cool-tone monograms
How to Apply River City Glitter
1Cut a MIRRORED (reversed) design with the glitter side down – a 60° blade and slightly higher force handle the thicker material best.
2Weed away the excess glitter around your design with a weeding tool.
3Preheat the garment 2-3 seconds to remove moisture and wrinkles.
4Cover the design with a Teflon or cover sheet, then press at 320°F for 15-20 seconds with medium/firm pressure.
5Peel the clear carrier while it is still WARM. If any glitter lifts, re-cover and press again for a few seconds.
Tip: Glitter is thick and textured – it is not made for tiny, fine-detail cuts. Keep letters and lines a little bolder for clean weeding and a crisp press.
What Glitter Neon Aqua Pairs With
Glitter Neon Aqua layers beautifully as a top accent over solid Smooth HTV. Popular pairings:
Perfect for
teamschoolclubs
Popular with
spiritwearteam dealersclub & corporate
What You Get
River City Glitter 20″ HTV in Neon Aqua, sold by the yard
Pressure-sensitive carrier for easy positioning
Cuts on any craft or professional plotter (Romeo, Juliet, and more)
Pairs perfectly with the Siser Weeder Tool and a quality heat press
Full press & care guidance – Tidio support if you need it
All River City Glitter Colors
Tap any color to shop that shade. Every River City Glitter color cuts, weeds, and presses the same way.
Glitter vs. Smooth HTV vs. Holographic
| Feature | Glitter | Smooth HTV | Holographic |
|---|---|---|---|
| Finish | Textured glitter | Smooth matte | Rainbow-shift |
| Best Use | Bold sparkle accents | Everyday lettering | Statement shine |
| Thickness | 325 micron | 90 micron | 110 micron |
| Layering | Top layer only | Fully layerable | Top layer only |
| Peel | Warm | Warm or cool | Cold |
Good to Know
Glitter is a top-layer material – do not press another layer on top of it.
It is thick and textured; avoid very fine or thin detail for cleanest results.
Always test-cut and test-press on scrap first; blade condition and press calibration vary.
Not sure if Neon Aqua is the right shade?
Tell us your fabric and artwork and we will match the right Glitter color and press settings. Message us on Tidio, email, or call (512) 454-0505.
Technical Specifications
| Material Specifications | |
|---|---|
| Product | River City Glitter Heat Transfer Vinyl – Neon Aqua |
| Material Type | Textured glitter HTV |
| Composition | PU with glitter, adhesive polyester backing |
| Thickness | 325 microns / 12.8 mils |
| Finish | Dense glitter, single layer |
| Width | 20 inches |
| Sold By | By the yard (from a 20″ wide roll) |
| Carrier | Pressure-sensitive (cold/clear carrier) |
| Blade | 45° or 60° (60° recommended) |
| Application Temp | 320°F / 160°C |
| Preheat Garment | 2-3 seconds |
| Press Time | 15-20 seconds |
| Pressure | Medium to firm |
| Peel | Warm |
| Cover Sheet | Use Teflon or cover sheet over the carrier |
| Layering | Top layer only – do not layer over Glitter |
| Fabrics | Cotton, polyester, poly/cotton blends, lycra/spandex (may crack when stretched), leather, sublimated polyester |
| Direct Sublimation | Not recommended for direct sublimation |
| Laundering & Care |
|---|
| Wait 24 hours before the first wash |
| Turn the garment inside out |
| Machine wash warm or cold with mild detergent |
| Dry on a normal setting |
| Do not dry clean; no chlorine bleach |
Specs per our technical data sheet. Always test cut and test press before production.
Technical Sheets / Safety Data Sheets / Documents
Vinyl Tools You May Need
Siser Weeder ToolThe go-to tool for weeding excess glitter cleanly from your designs.Shop the Weeder Tool →Cover Sheets & Weeding ToolsTeflon/cover sheets and weeders – essential for pressing textured Glitter.Browse HTV Tools →
Apply It Right: Heat Presses
Glitter presses at 320°F with medium/firm pressure and a warm peel. A quality heat press delivers the even, repeatable heat and pressure that thick glitter needs.
FREQUENTLY ASKED QUESTIONS
Does River City Glitter Neon Aqua shed?
No. River City Glitter Neon Aqua is a solid, textured glitter film – you get the full sparkle look with none of the loose glitter mess, so it stays clean on the garment and in your shop.
What temperature do I press River City Glitter Neon Aqua?
Press at 320°F / 160°C with medium to firm pressure for 15-20 seconds, using a Teflon or cover sheet over the carrier. Preheat the garment 2-3 seconds first.
Do I peel hot or cold?
Peel WARM. Let it cool just slightly, then peel the clear carrier. If any glitter lifts, re-cover and press again for a few seconds.
Can I layer other vinyl on top of Glitter?
No. Glitter is a top-layer material. You can layer Glitter on TOP of Smooth HTV, but never press another layer over the Glitter.
Is it good for fine detail?
Glitter is thick and textured, so it is not ideal for very fine or thin detail. Keep letters and lines a bit bolder for clean weeding and crisp results.
How is it sold?
By the yard from a 20-inch wide roll. Order the number of yards you need and we cut it continuously.
How do I wash it?
Wait 24 hours before the first wash. Turn the garment inside out and machine wash warm or cold with mild detergent, then dry on normal. No dry cleaning or chlorine bleach.
Still have a question about Neon Aqua?
We print with River City Glitter every day and are happy to help you dial in the perfect press.
Reviews
Only logged in customers who have purchased this product may leave a review.
You May Also Like
Related products
-
Sale!
Siser Easyweed 15” Stretch Burgundy Heat Transfer Vinyl – Thin and Flexible HTV
Original price was: $10.99.$5.00Current price is: $5.00. -
Sale!
Siser Easyweed 15” Stretch Bright Orchid Heat Transfer Vinyl – Thin and Flexible HTV
Original price was: $10.99.$5.00Current price is: $5.00. -
Gold Twinkle 20″ HTV – Siser Glitter Vinyl
Price range: $65.99 through $564.99 -
Sale!
Siser Easyweed 15” Stretch Charcoal Heat Transfer Vinyl – Thin and Flexible HTV
Original price was: $10.99.$5.00Current price is: $5.00.
Reviews