River City 20″ Silver Foil Heat Transfer Vinyl

Name: River City 20" Silver Foil Heat Transfer Vinyl - River City Supply
SKU: RC HTV Metallic - Silver
Price: 12.00 USD
Availability: InStock

River City Graphic Supply

River City 20″ Silver Foil Heat Transfer Vinyl delivers a brilliant, mirror-bright metallic silver finish that cuts, weeds and presses just like standard HTV — no special foil or adhesive needed. Design, cut, weed, press and peel for eye-catching shine on shirts, totes, hats and more.

River City brand. An affordable metallic HTV — not Siser-branded vinyl — so you get high shine without the premium price.

Silver metallic
High-shine reflective finish

20″ wide
Wide format for big designs

Cuts like HTV
Cricut, Silhouette & more

Cotton & poly
Cotton, blends & polyester

Make it shine in Silver. Questions on settings? Call 512-454-0505.

$12.00

6 in stock

SKU: RC HTV Metallic - Silver Categories: Heat Transfer Vinyl, River City 20” Foil Heat Transfer Vinyl – High Shine Metallic HTV Rolls Tags: 20 inch htv, foil heat transfer vinyl, foil htv, heat transfer foil, htv for shirts, metallic heat transfer vinyl, metallic htv, silver foil htv, silver heat transfer vinyl, Silver HTV

Description

River City 20″ Silver Foil Heat Transfer Vinyl

Add a touch of metallic brilliance in Silver. River City Foil HTV gives you a brilliant, reflective metallic finish in a cuttable heat transfer vinyl that behaves exactly like the HTV you already know — cut it, weed it, press it and peel. It’s our own affordable house-brand line, so you can stock every color your customers want and keep your margins healthy.

River City house brand. This is our own metallic foil HTV — not Siser-branded vinyl. Same show-stopping shine, a friendlier price for shops and crafters who go through a lot of it.

Color & Finish Options

This page is for Silver. Browse the full River City foil range below — from classic gold and chrome to color-shifting chameleon and wild animal prints.

Color	Finish Type
SOLID METALLIC
Gold	Solid Metallic
Silver You’re viewing	Solid Metallic
Red	Solid Metallic
Rose Gold	Solid Metallic
Royal Blue	Solid Metallic
Green	Solid Metallic
Purple	Solid Metallic
Turquoise	Solid Metallic
Aqua	Solid Metallic
Orange	Solid Metallic
Fuchsia	Solid Metallic
COLOR-SHIFT & SPECIALTY
Rainbow	Color-Shift & Specialty
Chameleon Flex	Color-Shift & Specialty
Metallic Chameleon	Color-Shift & Specialty
Spectrum	Color-Shift & Specialty
Fuzzy	Color-Shift & Specialty
ANIMAL & FLORAL PATTERN
Leopard Gold	Animal & Floral Pattern
Leopard Silver	Animal & Floral Pattern
Gold Roses	Animal & Floral Pattern
Pink Roses	Animal & Floral Pattern
Cheetah	Animal & Floral Pattern

Swatches are approximate; screens vary. Shop all 21 colors.

Shop All Foil Colors →

Why You’ll Love It

No foil adhesive needed

A self-contained HTV — one material, one press, no separate adhesive layer.

Cuts & weeds easily

Runs on any craft cutter or plotter with standard HTV settings.

Serious shine

A mirror-bright metallic surface that makes designs pop.

20″ wide & affordable

Wide rolls fit bigger designs; house-brand pricing keeps cost low.

Directions For Use

Using River City Foil Heat Transfer Vinyl is a simple process that can add a touch of metallic brilliance to your creative projects. Follow these step-by-step directions to guide you through application.

Materials You’ll Need

River City Foil Heat Transfer Vinyl · cutting machine (with a compatible blade) · weeding tool · heat press or iron · Teflon or parchment paper · garment or substrate for application

Step 1: Design and Cut

Create your design in a design-software program. Make sure it is the desired size and is mirrored (flipped horizontally), since you apply it face-down. Load the vinyl into your cutting machine with the shiny (foil) side down and the adhesive side facing up. Set your machine to the recommended setting for the vinyl (a standard vinyl or heat-transfer-vinyl setting is typically suitable) and cut — the machine cuts through the vinyl but leaves the carrier sheet intact.

Step 2: Weeding

Carefully weed away the excess vinyl with a weeding tool. Your design should remain on the carrier sheet, with only the parts you want to transfer still attached.

Step 3: Heat Press Application

Preheat your press to the recommended temperature for River City Foil HTV, typically around 305°F (150°C). Place the garment on the press and smooth out wrinkles. Position your weeded design (still on the carrier) with the foil side facing up and align it. Cover with Teflon or parchment paper, then press with medium pressure for about 10–15 seconds. Adjust pressure and time for your specific press and vinyl.

Step 4: Cooling and Peeling

Lift the press and remove the Teflon/parchment. Let the garment cool for a few seconds (moving it to a cooler surface speeds this up). Once cooled, gently peel away the carrier sheet, leaving the metallic foil design on the garment.

Step 5: Final Touches

For a lasting bond, place a Teflon sheet or parchment over the applied design and press an additional 2–3 seconds. Wait at least 24 hours before washing; wash inside out with mild detergent, and avoid bleach or harsh chemicals.

Application Instructions

Home Iron

Set iron dial between Cotton and Linen
Cover design with multipurpose paper or a heat-transfer cover sheet
Place on a flat, hard surface (ironing board not recommended)
Press with medium/firm pressure (do not slide the iron)
Press each section of the design for 10–15 seconds
If areas lift after application, replace the cover sheet and re-press 5–10 seconds
Peel carrier warm

Heat Press

Cover design with multipurpose or heat-transfer cover sheet
Preheat garment for 2–3 seconds
Apply design at 275°F / 135°C
Use medium pressure for 10–15 seconds
Peel carrier warm

Recommended Cutter Settings

Cricut	Blade: Standard · Setting: Iron-on
Silhouette Cameo	Blade: Standard, 2 · Material: Heat Transfer, Smooth · Speed: 8 · Force: 4
Brother ScanNCut	Blade: Standard, 2 · Cut Speed: 1 · Cut Pressure: 3
Roland GX/GS-24	Blade: 45° · Gram Force: 80–90 · Offset: .250 · Speed: 30–50 cm/s
Graphtec	Blade: 45° · Force: 8–9 · Tool: CB09U+0 · Speed: 30 cm/s
MH, SC2, LP3, Titan 1	Blade: 45°/60° · Gram Force: 85–90 · Speed: 300 mm/s · *blade advancing varies
Titan 2 & 3	Blade: 45°/60° · Gram Force: 65–70 · Speed: 300 mm/s · *blade advancing varies

Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

With River City 20″ Silver Foil Heat Transfer Vinyl, your creative projects will shine like never before. Add a touch of metallic brilliance and make a lasting impression — elevate your crafting game with Silver Foil today!

Perfect For

Spirit wear & team names · cheer and dance apparel · fashion tees & tanks · tote bags · hats & beanies · onesies · holiday and event shirts · anything that needs to catch the light.

Everything To Finish The Job

Heat Presses

Even heat & pressure for clean, lasting transfers.

Cover Sheets & Weeders

Protect the finish and weed designs fast.

Heat Transfer Vinyl

Solid-color HTV to layer and pair with your foils.

All Foil Colors

Browse the full metallic & pattern range.

Why Buy From River City Supply?

Real printers who press garments every day.

House-brand value

Big shine, small price — stock more colors for less.

Pressing help

Not sure on settings? Call (512) 454-0505 — we’ll dial you in.

One-stop shop

Vinyl, presses, cover sheets & tools — all in one order.

Fast shipping

Same-day shipping on in-stock orders before 3:30 PM CT.

Call (512) 454-0505

Technical Specifications

Silver Foil HTV – Technical Specs

Brand	River City (house brand — not Siser)
Product	Foil / metallic heat transfer vinyl (HTV)
Width	20 inches
Color	Silver
Finish	Metallic
Adheres to	Cotton, cotton blends, polyester
Application	Cuts, weeds & presses like standard HTV
Adhesive	Self-contained — no separate foil adhesive
Compatible cutters	Cricut, Silhouette, Brother, Roland, Graphtec & more
Cut	Mirror design; shiny (foil) side down
Heat press	275°F / 135°C, medium pressure 10–15 s, warm peel
Home iron	Cotton/Linen setting, cover sheet, 10–15 s, warm peel
Best for	Apparel, spirit wear, totes, hats & accessories

Good to know: This is a cuttable metallic HTV, not press-on transfer foil — no foil sheet or foil adhesive step. Just cut, weed, press and peel. Always run a test cut and test press first.

Technical Sheets / Safety Data Sheets / Documents

FREQUENTLY ASKED QUESTIONS

Silver Foil HTV – FAQ

Is Silver Foil HTV Siser vinyl?

No — this is River City’s own house-brand foil HTV. It delivers the same brilliant metallic shine at a more budget-friendly price, great when you go through a lot of specialty vinyl.

Do I need special foil and adhesive?

No. Unlike true heat-transfer foil (a foil sheet over a separate adhesive), this is a self-contained metallic HTV — cut, weed, press and peel.

What machines can cut it?

Any craft cutter or plotter — Cricut, Silhouette, Brother, Roland, Graphtec and more — using standard HTV settings. Mirror your design and cut shiny side down. See the cutter-settings table on the description.

What press settings should I use?

By heat press: cover with a cover sheet, preheat the garment 2–3 s, then press at 275°F/135°C, medium pressure, 10–15 s, warm peel. By iron: Cotton/Linen setting, firm pressure, 10–15 s per section. Always test first.

What can I put Silver on?

Cotton, cotton blends and polyester — shirts, tote bags, hats, onesies and more. Anything you’d normally decorate with HTV and want to add serious shine to.

Can I layer it with regular HTV?

Yes — pair Silver foil accents with solid heat transfer vinyl for multi-layer designs. Press per the top layer and use a cover sheet to protect the shine.

How do I care for it?

Wait at least 24 hours before the first wash. Turn the garment inside out, use a mild detergent, and avoid bleach or harsh chemicals.

Need help choosing a color or dialing in your press?

We press garments daily and are happy to help.

Call (512) 454-0505

Reviews

Only logged in customers who have purchased this product may leave a review.

River City 20″ Silver Foil Heat Transfer Vinyl

Description

River City 20″ Silver Foil Heat Transfer Vinyl

Color & Finish Options