Action Engineering Stahls’ Butt Printing Platen – Heat Press Platen for Shorts & Back Garment Printing

Action Engineering

Action Engineering Stahls’ Butt Printing Platen – Heat Press Platen for Shorts & Back Garment Printing
Action Engineering Stahls’ Butt Printing Platen – Heat Press Platen for Shorts & Back Garment Printing

Action Engineering Stahls’ Butt Printing Platen is a specialty heat press platen engineered specifically for printing on the back of shorts, joggers, sweatpants, and athletic garments. Designed to eliminate misalignment and uneven pressure, this platen creates a flat, stable pressing surface that improves transfer quality and production efficiency.

Back-of-short printing can be difficult due to seams, waistbands, and garment contouring. This platen features a shaped design with built-in back seam alignment and waistband easement, allowing decorators to position garments accurately without constant manual adjustments. The result is faster setup, fewer errors, and consistent professional results.

Whether you’re applying DTF transfers, heat transfer vinyl (HTV), plastisol transfers, or sublimation prints, this platen ensures even heat and pressure distribution across the print area — minimizing creasing and reducing costly reprints.

If your shop decorates athletic wear, team uniforms, or streetwear with back prints, this platen is a workflow upgrade that improves both speed and accuracy.

$195.00

--- GLOBAL RULE LOCATIONS ---
Array
(
    [0] => stdClass Object
        (
            [post_id] => 1714
            [meta_key] => _pricing_rules
        )

    [1] => stdClass Object
        (
            [post_id] => 2853
            [meta_key] => _pricing_rules
        )

    [2] => stdClass Object
        (
            [post_id] => 2854
            [meta_key] => _pricing_rules
        )

    [3] => stdClass Object
        (
            [post_id] => 2884
            [meta_key] => _pricing_rules
        )

    [4] => stdClass Object
        (
            [post_id] => 2937
            [meta_key] => _pricing_rules
        )

    [5] => stdClass Object
        (
            [post_id] => 2941
            [meta_key] => _pricing_rules
        )

    [6] => stdClass Object
        (
            [post_id] => 2944
            [meta_key] => _pricing_rules
        )

    [7] => stdClass Object
        (
            [post_id] => 2955
            [meta_key] => _pricing_rules
        )

    [8] => stdClass Object
        (
            [post_id] => 2956
            [meta_key] => _pricing_rules
        )

    [9] => stdClass Object
        (
            [post_id] => 2957
            [meta_key] => _pricing_rules
        )

    [10] => stdClass Object
        (
            [post_id] => 2958
            [meta_key] => _pricing_rules
        )

    [11] => stdClass Object
        (
            [post_id] => 2959
            [meta_key] => _pricing_rules
        )

    [12] => stdClass Object
        (
            [post_id] => 2960
            [meta_key] => _pricing_rules
        )

    [13] => stdClass Object
        (
            [post_id] => 2961
            [meta_key] => _pricing_rules
        )

    [14] => stdClass Object
        (
            [post_id] => 2962
            [meta_key] => _pricing_rules
        )

    [15] => stdClass Object
        (
            [post_id] => 2963
            [meta_key] => _pricing_rules
        )

    [16] => stdClass Object
        (
            [post_id] => 2964
            [meta_key] => _pricing_rules
        )

    [17] => stdClass Object
        (
            [post_id] => 2965
            [meta_key] => _pricing_rules
        )

    [18] => stdClass Object
        (
            [post_id] => 2966
            [meta_key] => _pricing_rules
        )

    [19] => stdClass Object
        (
            [post_id] => 2967
            [meta_key] => _pricing_rules
        )

    [20] => stdClass Object
        (
            [post_id] => 2968
            [meta_key] => _pricing_rules
        )

    [21] => stdClass Object
        (
            [post_id] => 2977
            [meta_key] => _pricing_rules
        )

    [22] => stdClass Object
        (
            [post_id] => 3114
            [meta_key] => _pricing_rules
        )

    [23] => stdClass Object
        (
            [post_id] => 4638
            [meta_key] => _pricing_rules
        )

    [24] => stdClass Object
        (
            [post_id] => 4639
            [meta_key] => _pricing_rules
        )

    [25] => stdClass Object
        (
            [post_id] => 4667
            [meta_key] => _pricing_rules
        )

    [26] => stdClass Object
        (
            [post_id] => 3690
            [meta_key] => _pricing_rules
        )

    [27] => stdClass Object
        (
            [post_id] => 3692
            [meta_key] => _pricing_rules
        )

    [28] => stdClass Object
        (
            [post_id] => 3731
            [meta_key] => _pricing_rules
        )

    [29] => stdClass Object
        (
            [post_id] => 3752
            [meta_key] => _pricing_rules
        )

    [30] => stdClass Object
        (
            [post_id] => 3762
            [meta_key] => _pricing_rules
        )

    [31] => stdClass Object
        (
            [post_id] => 3792
            [meta_key] => _pricing_rules
        )

    [32] => stdClass Object
        (
            [post_id] => 3852
            [meta_key] => _pricing_rules
        )

    [33] => stdClass Object
        (
            [post_id] => 3980
            [meta_key] => _pricing_rules
        )

    [34] => stdClass Object
        (
            [post_id] => 4013
            [meta_key] => _pricing_rules
        )

    [35] => stdClass Object
        (
            [post_id] => 4020
            [meta_key] => _pricing_rules
        )

    [36] => stdClass Object
        (
            [post_id] => 4022
            [meta_key] => _pricing_rules
        )

    [37] => stdClass Object
        (
            [post_id] => 4044
            [meta_key] => _pricing_rules
        )

    [38] => stdClass Object
        (
            [post_id] => 4205
            [meta_key] => _pricing_rules
        )

    [39] => stdClass Object
        (
            [post_id] => 4270
            [meta_key] => _pricing_rules
        )

    [40] => stdClass Object
        (
            [post_id] => 4272
            [meta_key] => _pricing_rules
        )

    [41] => stdClass Object
        (
            [post_id] => 4620
            [meta_key] => _pricing_rules
        )

    [42] => stdClass Object
        (
            [post_id] => 4651
            [meta_key] => _pricing_rules
        )

    [43] => stdClass Object
        (
            [post_id] => 4673
            [meta_key] => _pricing_rules
        )

    [44] => stdClass Object
        (
            [post_id] => 4946
            [meta_key] => _pricing_rules
        )

    [45] => stdClass Object
        (
            [post_id] => 5355
            [meta_key] => _pricing_rules
        )

    [46] => stdClass Object
        (
            [post_id] => 5390
            [meta_key] => _pricing_rules
        )

    [47] => stdClass Object
        (
            [post_id] => 5398
            [meta_key] => _pricing_rules
        )

    [48] => stdClass Object
        (
            [post_id] => 5407
            [meta_key] => _pricing_rules
        )

    [49] => stdClass Object
        (
            [post_id] => 5445
            [meta_key] => _pricing_rules
        )

)
SKU: ACT HPBUTT Categories: , Tags: , , , , , , , , ,

Description

Stahls’ Butt Printing Platen – Key Features & Benefits:

  • Contoured alignment design – Includes back seam positioning and waistband easement for precise placement
  • Optimized for back-of-short printing – Ideal for athletic shorts, joggers, and sweatpants
  • Reduces manual garment adjustments – Improves speed and minimizes alignment errors
  • Flat, stable pressing surface – Ensures even heat and pressure distribution
  • Improves DTF and HTV adhesion – Eliminates creasing and uneven contact
  • Heavy-duty ¾″ aluminum construction – Built for commercial production durability
  • ⅜″ silicone rubber top – Delivers consistent transfer performance
  • Designed for high-volume environments – Reliable for daily production use

Ideal For:

  • Athletic shorts back prints
  • Team uniform decoration
  • Jogger and sweatpant branding
  • Streetwear customization
  • DTF and HTV back-of-garment applications

Technical Specifications:

  • Model: Stahls_ButtPLT-AK__82351
  • Construction: ¾″ aluminum
  • Surface: ⅜″ silicone rubber
  • Designed For: Shorts, joggers, sweatpants, and back garment printing

Note: This product drop ships directly from Action Engineering and is made to order. Please allow additional processing and shipping time.

Technical Specifications

Technical Sheets / Safety Data Sheets / Documents

FREQUENTLY ASKED QUESTIONS

Reviews

Reviews

Only logged in customers who have purchased this product may leave a review.

You May Also Like

Related products

Additional Options

Read Our Reviews

Need Help?

Contact Us

Monday - Friday
9am - 5pm

Free in-store pickup

In-stock orders ready in 1 hour

Get the latest news & exclusive offers