Printers Choice Cured Plastisol Stain & Spot Remover Fluid – Fast, Clean Ink Removal for Screen Printers

No Ringing. No Yellowing. Period.

The two biggest failure modes with cheap spot removers are ringing — that telltale halo left behind when a solvent spreads the ink outward — and yellowing, which permanently discolors white or light fabrics. Printers Choice’s ultra-pure acetone-based formula is engineered to flush the soil straight through the fabric without spreading or leaving chemical residue behind. Fast evaporation means no wet ring forms, and the absence of impurities and fillers means no yellowing ever.

Cured Plastisol — The Hardest Job

Most spot removers tackle uncured ink easily. Printers Choice Spot Cleaning Fluid is specifically proven on cured plastisol ink — the job after the dryer has already set the ink into the fabric. That’s where the chemistry really matters. Printers Choice’s solvent system penetrates the cured PVC binder and lifts it from the fiber, making it one of the few spot cleaners shops trust for post-production garment rescue.

Non-Chlorinated Formula — RSL Ready

Chlorinated solvents like perchloroethylene and TCE have been phased out of most major brands’ Restricted Substance Lists (RSLs) — and for good reason. Printers Choice Spot Cleaning Fluid is a direct chlorinated and bromine solvent replacement that complies with most major RSL requirements, making it safe to use in facilities supplying to Nike, Adidas, H&M, Target, and other RSL-enforcing brands. Zero ozone-depleting chemicals. Zero carcinogenic chlorinated compounds.

Premium Purity — No Fillers, No Compromises

Budget solvent blends often use cheap filler components that dilute the active chemistry and leave oily residues behind. Printers Choice uses only premium-grade, ultra-pure ingredients in its formulation. That means consistent performance bottle-to-bottle, faster dry times, and a cleaner finish on every garment you treat. When you’re rescuing a $25 garment, you want chemistry you can count on — not a mystery blend.

Works on Flock Adhesive Too

Flock printing shops know the headache of adhesive smears and overspray on surrounding fabric. Printers Choice dissolves flock adhesive just as effectively as plastisol, making it a multi-purpose spot cleaning solution for shops running specialty processes alongside traditional plastisol printing.

Fast-Drying for Production Floor Speed

With a boiling point of 55–56°C and a high vapor pressure, Printers Choice evaporates rapidly after application. That means less downtime waiting for garments to dry before inspection or reprint decisions. On a busy production floor, fast dry time is not a luxury — it’s a workflow requirement.

Albatross Expert QD-3500 Quick-Dry Textile Cleaning Gun

Printers Choice Spot Cleaning Fluid works best when applied through a dedicated spot cleaning gun — not poured on by hand. The Expert QD-3500 is the industry-standard choice for screen printing shops. It combines a precision spot cleaning nozzle with a built-in compressed air trigger, so you can flush the ink through with Printers Choice and blow-dry the treated area in the same motion, with one hand. The adjustable nozzle lets you switch between a focused jet for stain removal and a wider mist pattern for feathering edges — exactly the technique called out in Printers Choice application guide.

View Expert QD-3500 →

Back the Fabric

Place a clean, dry cloth or absorbent pad behind the stained area. This backing absorbs the dissolved ink as it flushes through the fabric instead of letting it spread.

Apply Printers Choice

Using a spot gun or direct stream, direct a jet of fluid through the soil. The goal is to flush the dissolved ink down through the fabric and into the backing cloth — not to spread it across the surface.

Flush Until Clear

Continue applying fluid until the stain is completely flushed away. Replace the backing cloth as it absorbs ink to avoid transferring dissolved ink back to the garment.

Adjust for Ringing

If ringing or spotting occurs around the treated area, adjust your spot gun tip to a wider mist pattern and spray around the damp area. This feathers the edge and eliminates the halo effect.

Allow to Dry

Printers Choice dries rapidly due to its high vapor pressure. Allow the garment to air out in a well-ventilated area before final inspection or reprinting. Do not apply heat until fully dry.

⚠ Flammable — Class 2 Liquid

Printers Choice Spot Cleaning Fluid is a highly flammable liquid (UN1993, Class 3, PG II). Flash point below -18°C. Keep away from heat, sparks, open flames, and hot surfaces. Store in a cool, well-ventilated area in tightly sealed containers. No smoking in storage or use areas.

✅ No Hazmat Surcharge

We fulfill all orders in quart containers, which ship without the hazmat carrier surcharges that apply to gallons. You get the same volume — no $50–$58 per-box hazmat fee added at checkout.

🧤 PPE Required

Wear chemical-resistant gloves and tightly-sealed safety goggles when handling. Use only in well-ventilated areas — vapors may cause drowsiness or dizziness (STOT SE 3). Eye contact causes serious irritation. Review the full SDS before first use.