AlbaChem® 1783 Web Spray Adhesive – Secure Bond for Fleece & Sweats Printing
Albatross
AlbaChem® 1783 Premium Web Adhesive is the go-to pallet adhesive for printing on fleece, hoodies, sweatshirts, and other textured or pile fabrics. Its web spray pattern creates a fibrous, long-lasting tack that interlocks with deep pile surfaces where standard mist adhesives cannot get a grip. Less overspray than mist products, will not transfer to garments, and holds through the entire print run. VOC compliant in all 50 states including California — no separate CA version needed.
Order before 3:30 PM CT.
Free shipping over $200.
(512) 454-0505
$14.99
Description
AlbaChem® · Item #1783 · 13 oz Aerosol · Shop All Spray Adhesives
The Web Adhesive Built for Fleece, Hoodies & Heavy Garments
When mist adhesives fail to grip the deep pile of fleece or the looped texture of a hoodie lining, you need a web adhesive. AlbaChem® 1783 Premium Web Adhesive lays down a fibrous web pattern that interlocks with textured fabric surfaces, delivering a strong, durable tack that holds throughout the entire print run without transferring residue onto garments. Fully CARB/VOC compliant — all 50 states including California.
What’s Included
Key Performance Features
Web Pattern for Textured Fabrics
The fibrous web spray was engineered for fleece, terry cloth, French terry, and other pile fabrics where standard mist adhesives absorb into the pile without adequate surface contact. The web interlocks mechanically with the fabric texture for a reliable hold mist adhesives cannot match.
Less Overspray Than Mist
The web format concentrates adhesive in a tight, structured pattern with significantly less ambient drift than fine or coarse mist sprays. Less waste, less buildup on surrounding equipment, and a cleaner shop environment.
Long-Lasting Tack
Dries quickly to a durable tack that requires less frequent reapplication. Fewer stops during a run means higher throughput — especially valuable on high-volume hoodie and sweatshirt jobs.
Will Not Transfer
The formula dries to a non-transferable tack. Garments come off the platen clean — no sticky residue on the fabric, no customer complaints about tacky hoodie interiors.
VOC Compliant All 50 States
At under 55% VOC by weight, the 1783 meets CARB standards and is compliant in all U.S. states including California. Unlike the 1786 and 1787, no separate CA-specific version is required.
Clean Chemistry
Contains no chlorinated solvents and no vinyl acetate. Stable and non-reactive under normal storage conditions. HMIS Health 2, Physical 3, Reactivity 0.
Safety & Ventilation
PPE — HMIS Cat. B
Chemical-resistant gloves and safety glasses during application. Avoid prolonged skin contact.
Ventilation
Use in a well-ventilated area. Maintain shop exhaust airflow during and after spraying.
Flammability
Level 3 aerosol flammability. Keep away from all open flames, sparks, and heat sources. Do not puncture or incinerate.
VOC / CA
Under 55% VOC — CARB compliant all 50 states. No CA-specific version needed.
Step Zero: Apply Pallet Tape Before You Spray
Cover the clean platen with pallet tape before spraying the 1783. Spray the web adhesive onto the tape surface rather than bare platen. End-of-job cleanup is just peeling off the tape — no solvents, no scrubbing, no downtime.
Platen Workflow
1
Cover platen with pallet tape
2
Spray 1783 web from 6–8 inches
3
Load garment — web grips pile
done
Cleanup: Peel tape. Done.
Web vs. Mist — Why It Matters for Fleece
The Fleece Problem
Fleece and French terry have a looped pile that absorbs fine mist adhesive without creating enough surface contact for a reliable grip. Shirts shift during printing, causing misregistration and wasted garments.
How Web Adhesive Solves It
The web pattern lays down fibrous strands that physically interlock with the fabric pile rather than sitting on top. This creates a mechanical bond that holds through every squeegee pass.
When to Use Web vs. Mist
Use the 1783 for fleece, hoodies, and textured fabrics. For smooth T-shirts, the 1787 Mist or 1786 Flash will serve you better.
Application Guide
Step 1 — Tape the Platen
Apply pallet tape to clean, dry platen. Smooth out all bubbles.
Step 2 — Shake the Can
Shake well before each use to ensure even distribution of the web adhesive and propellant.
Step 3 — Spray the Web
Hold can 6–8 inches from the platen. Apply a light, even coat using a smooth sweeping motion. Avoid concentrating in one spot.
Step 4 — Allow to Dry
Allow the web to dry briefly before placing the first garment. Dry tack grips deeper into pile than wet tack.
Step 5 — Load & Print
Place garment and press lightly. Reapply when tack noticeably fades.
Step 6 — Cleanup
Peel pallet tape for zero-solvent cleanup. Invert can and spray until clear air flows to prevent nozzle clogging.
| Feature | 1783 Web | 1787 Mist | 1786 Flash |
|---|---|---|---|
| Best for | Fleece & textured | Standard garments | Multi-color flash |
| Spray pattern | Web (fibrous) | Coarse mist | Fine mist |
| Overspray | Lowest | Low | Low |
| CA compliant | Yes — all 50 states | No (use 1787C) | No (use 1786C) |
| Flash optimized | No | No | Yes |
✅ California Friendly
Under 55% VOC by weight, CARB compliant all 50 states. No CA-specific version needed.
💡 Spray Distance
Hold 6–8 inches from platen. Light even sweep. Always spray onto pallet tape.
💡 Also Consider
AlbaChem 1175 DRI-WEB — quick-dry web adhesive, also great for heavy fabrics.
Ready to Order?
Order before 3:30 PM CT for same-day shipping. Free over $200. Pair with pallet tape.
(512) 454-0505 · [email protected]
Technical Specifications
AlbaChem® 1783 — Technical Specifications
| Product Details | |
|---|---|
| Product Name | AlbaChem® Premium Web Adhesive |
| Item Number | 1783 |
| Manufacturer | Albatross USA / AlbaChem® · Long Island City, NY |
| Net Weight | 13 oz (368.5 g) per can |
| Case Pack | 12 cans per case |
| Spray Pattern | Web (fibrous pattern) |
| Shelf Life | Greater than 1 year |
| Physical & Chemical Properties | |
|---|---|
| Appearance | Cloudy / White |
| Odor | Solvent |
| Specific Gravity | 0.6543 (estimated) |
| VOC Content | Less than 55% by weight |
| VOC Compliance | Compliant in all 50 U.S. states including California (CARB) |
| Chlorinated Solvents | None |
| Vinyl Acetate | None |
| Reactivity | Stable, non-reactive under normal conditions |
| HMIS Hazard Ratings | |
|---|---|
| Health | 2 — Moderate |
| Physical | 3 — Serious (Level 3 aerosol) |
| Reactivity | 0 — Insignificant |
| Personal Protection | B — Gloves & Eye Protection |
| Carcinogens | None |
| Application | |
|---|---|
| Spray Distance | 6–8 inches from platen surface |
| Best Substrates | Fleece, hoodies, French terry, textured and pile fabrics |
| Press Compatibility | Manual and automatic screen printing presses |
| Residue Transfer | Will not transfer to garments |
Data from AlbaChem® official TDS. Call (512) 454-0505 for current documentation.
Technical Sheets / Safety Data Sheets / Documents
FREQUENTLY ASKED QUESTIONS
Frequently Asked Questions — AlbaChem® 1783 Premium Web Adhesive
Order AlbaChem® 1783 — In Stock at River City Supply
Same-day shipping before 3:30 PM CT · Free over $200 · Pair with pallet tape · (512) 454-0505
Reviews
Only logged in customers who have purchased this product may leave a review.







Reviews