TW 5570 Flat Metallic Silver Water-Based Poster Ink Clean, Refined Silver for Poster & Flat Stock Screen Printing
TW Graphics
TW 5570 Flat Metallic Silver is a genuine aluminum-flake metallic water-based screen printing ink from the TW 5500 Flat Series — a true reflective silver that delivers the light-catching, premium metallic surface that concert poster editions, fine art serigraphs, and specialty flat-stock work demand when design calls for genuine metallic impact. Not a pearlescent or simulated silver. Available in quart and gallon, in stock at River City Supply, ships same day from San Antonio, TX.
✓ Aluminum Flake Silver
✓ Premium Poster Metallic
✓ Flat / Matte Finish
✓ Press Ready
✓ Made in USA
🚚 Same-Day Shipping Before 3:30 PM CT | Free Shipping Over $200 | Stocked in San Antonio, TX
Price range: $59.99 through $173.66
Description
TW Graphics — TW 5500 Flat Series — Water-Based Poster Ink
TW 5570 Flat Metallic Silver — Water-Based Poster Ink
TW 5570 Flat Metallic Silver is a genuine aluminum-flake metallic water-based poster ink from the TW 5500 Multi-Purpose Water-Based Series — a true reflective silver that delivers the light-catching, premium metallic surface that concert poster editions, fine art serigraphs, and specialty flat-stock work demand when design calls for genuine metallic impact. Not a pearlescent or simulated silver. Press ready, formulated for the full TW 5500 substrate range.
Key Features
Genuine Aluminum Flake Metallic Silver
TW 5570 contains true aluminum flake pigment in a water-based carrier — the same technology that produces genuine metallic character in premium printing applications. The result is a light-reflective, visually dynamic silver surface that reads as genuinely metallic under all lighting conditions, not pearlescent or simulated.
Premium Metallic Effect Building Medium
Overprint transparent TW 5500 colors over a fully dried TW 5570 pass for custom colored-metallic effects. The metallic surface underneath tints the overprinted transparent color with a metallic quality that no mixed-in-the-bucket approach can replicate. Used in fine art serigraph editions for the kind of colored metallic effects that command collector attention.
Rich Flat Finish
TW 5500 Series inks cure to a controlled flat/matte surface that eliminates glare, enhances color depth under gallery and stage lighting, and gives printed pieces a premium hand-pulled serigraph feel.
Press Ready
Supplied press-ready for most applications. Stir well and print. Additives available for specific conditions but not required for standard runs.
Multi-Substrate Adhesion
Adheres to polystyrene, Tyvek®, Tedlar®, polycarbonate, treated polyesters, pressure-sensitive vinyl, and aircraft interior panels — the full flat-stock and specialty print substrate range.
Fast, Clean Cleanup
Water-based chemistry means screens clean with water. No harsh solvents, no hazardous waste from the ink itself. Faster between-run cleanup than solvent systems.
Color Character & On-Press Behavior
Understanding how TW 5570 Metallic Silver behaves on press — not just what it looks like in the bucket — is what separates professional poster printers from the rest.
Color Bias & Character
True metallic silver — aluminum flake pigment. Light-reflective, not pearlescent. Genuine metallic character on printed surface.
Mixing Potential
Use with TW 5532 Metallic Clear for extended volume. Overprint transparent TW 5500 colors over fully dried TW 5570 for colored metallic effects.
Halftone Performance
Not recommended for fine halftone screens. Aluminum flake particles are too large for clean dot formation. Use for solid flood coverage and large graphic elements.
Print Sequence
Print early-to-mid sequence for metallic underprint effects. Print standalone as a final accent element. Stir frequently during run to keep flake in suspension.
Who Prints with TW 5570 Metallic Silver?
🎤 Concert & Art Poster Print Shops (Premium Editions)
Metallic silver elements — a background flood, a spotlight effect, a type treatment — are a premium feature of limited-edition concert poster work that collectors specifically seek out. TW 5570 delivers genuine metallic quality in the TW 5500 water-based system.
🌟 Fine Art Serigraph Studios
Gallery-quality serigraph editions incorporating metallic elements use TW 5570 for the authentic metallic surface that distinguishes premium print editions from standard color work. Genuine metallic inks command higher edition prices and collector interest.
🍴 Premium POP & Luxury Retail Display Printers
Luxury retail display for jewelry, spirits, cosmetics, and premium brands requires genuine metallic elements that communicate premium quality. TW 5570 on polystyrene and pressure-sensitive vinyl delivers authentic metallic silver character for luxury display applications.
✈ Aircraft Interior & Specialty Industrial Printers
Specialty industrial applications including aircraft interior panel graphics and premium nameplates often require genuine metallic elements. TW 5570 provides authentic metallic character with TW 5500 Series substrate compatibility and light-fastness.
On-Press Setup — TW 5570 Metallic Silver
Mesh Count
200–380 monofilament polyester. Start at 230 mesh for solid spot-color coverage. Use 305–380 for fine halftone and detail work. Higher mesh = finer detail, lower opacity per pass.
Squeegee
70–85 durometer polyurethane, sharp edge. Start at 75 durometer for most applications. Use a harder squeegee (80–85) for fine halftone work. Ensure sharp, clean edge for consistent ink transfer.
Stencil
Solvent and water-proof emulsion only. Murakami Photocure Pro dual-cure photopolymer is preferred for all TW 5500 Series work. For extended long runs, apply Murakami MS Hardener before going to press.
Drying
Air dry: 20–30 minutes at room temperature between color passes. Force dry: a few seconds at 90–150°F for faster production. Allow full dry before stacking prints or applying overprint passes.
Press Preparation
Stir TW 5570 Metallic Silver thoroughly from the bottom of the bucket before press-up. Off-contact distance of 1⁄16″–1⁄8″ is typical for flat-stock applications. Print a test sheet before committing to the full edition.
Cleanup
Clean screens with water immediately after press-down. Do not allow TW 5500 Series inks to dry in the screen. For stencil reclaim, use a standard water-based emulsion remover after water cleanup.
TW Graphics Additives for TW 5570 Metallic Silver
TW 5500 Series inks are press-ready for most applications. When press conditions require adjustment, TW Graphics offers a complete additive line specifically engineered for the 5500 Series system. Never use additives from other ink systems — they may cause adhesion, drying, or compatibility problems.
Browse all TW Graphics water-based additives at River City Supply →
Complete TW 5500 Flat Series Color Lineup
Shop the complete TW 5500 Series below. TW 5570 Metallic Silver is highlighted. All 43 colors available in quart and gallon, in stock at River City Supply, ships same day from San Antonio, TX.
Screen Room Recommendation
Best Emulsion for TW Graphics Poster Inks: Murakami Photocure Pro
TW 5500 Series inks demand a stencil that holds fine halftone detail, resists moisture breakdown through long runs, and survives the water-based ink environment without edge bleed or stencil degradation. Our recommendation is Murakami Photocure Pro — and for extended long runs, Murakami MS Hardener applied before going to press.
Why Buy TW Graphics Inks from River City Supply?
Authorized TW Graphics distributor based in San Antonio, TX — center of the country. We stock the full TW 5500 lineup deep, ship same day before 3:30 PM CT, and know these inks inside and out.
🕒 Same-Day Shipping
Orders before 3:30 PM CT ship the same business day from San Antonio, TX.
🌎 Faster Than Ordering Direct
TW Graphics ships from California. We ship from San Antonio — 1–3 day transit to most of the U.S.
🚚 Free Shipping Over $200
Hit $200 and shipping is on us. Stock the full 5500 lineup in one order.
📦 Full Lineup Stocked
Every TW 5500 color, all additives, Murakami emulsions. No backorders.
🎉 Authorized TW Distributor
Genuine TW Graphics product. Full technical support on every order.
📞 Real People, Real Help
Call (512) 454-0505 or email [email protected]
⚠ Over-Reduction Warning
Over-reduction with retarders and thinners can result in blocking and a significant reduction in drying speed. Never exceed recommended additive levels.
⚠ Test Before Production
Always run a test print on the production substrate first. Substrate surface energy, mesh count, and squeegee hardness all interact with final print results.
⚠ 24-Hour Evaluation
Allow at least 24 hours after printing before evaluating adhesion and suitability for the substrate and intended end use.
Build Your Full Color Palette
Shop the complete TW 5500 Flat Series and build your full palette in one order with same-day shipping from San Antonio, TX.
Stock Your Additives
Add TW Z1820 Thinner, TW 5100 Defoamer, and TW Z1822 Retarder to your order — the three additives most commonly needed in TW 5500 Series production.
Ready to Order?
Call (512) 454-0505 or email [email protected]. Same-day shipping before 3:30 PM CT. Free shipping over $200.
Technical Specifications
| Specification | Detail |
|---|---|
| SKU | TW 5570 Metallic Silver |
| Color Properties | True metallic silver; aluminum flake pigment; light-reflective; not pearlescent or simulated; genuine metallic character on printed surface. |
| Series | TW 5500 Multi-Purpose Water-Based Flat Series |
| Manufacturer | TW Graphics (USA, est. 1923) |
| Ink Type | One-component, flexible, flat water-based ink system |
| Finish | Flat / Matte |
| Pigment Quality | Automotive-grade pigments |
| Light-Fastness | Up to 3 years indoor light-fastness |
| Available Sizes | Quart and Gallon |
| Press Ready | Yes — supplied press-ready. Stir well before use. |
| Compatible Substrates | Fine art serigraph paper, polystyrene, Tyvek®, Tedlar®, polycarbonate, treated polyesters, pressure-sensitive vinyl, aircraft interiors, skateboards, poster board |
| Recommended Mesh | 200–380 (80–150 cm) monofilament polyester |
| Squeegee | 70–85 durometer polyurethane, sharp edge |
| Stencil | Solvent and water-proof emulsion only. Dual-cure recommended — Murakami Photocure Pro preferred. |
| Air Dry | 20–30 minutes at room temperature |
| Force Dry | Seconds at 90–150°F (32–66°C) |
| Coverage Rate | 1,400–2,000 sq ft per gallon (33–47 sq meters per liter) |
| TW Z1820 Thinner | 5–10% by weight — standard press viscosity reducer |
| TW Z1822 Retarder | 5–10% by weight — normal open time extension |
| TW Z1823 Slow Retarder | 5–10% by weight — heavy-duty open time; slow print cycles |
| TW 5100 Defoamer | 1–2% by weight — eliminates bubbling at high press speeds. Do not exceed 2%. |
| TW 25233 Flattening Powder | 1–8% by weight — reduces gloss to satin or matte |
| TW XPX1018 WB-Activator | 10% by weight — chemical resistance. 24-hr pot life. One reactivation allowed. |
| Evaluation Period | Allow 24 hours after printing before evaluating adhesion and suitability |
| Ships From | San Antonio, TX — same-day on orders before 3:30 PM CT |
| Country of Origin | USA |
Technical Sheets / Safety Data Sheets / Documents
FREQUENTLY ASKED QUESTIONS
Can TW 5570 Metallic Silver be printed in halftone for graduated metallic effects?
Metallic inks with aluminum flake pigment do not halftone effectively. The flake particles are too large to transfer consistently through fine halftone screens, producing irregular, blotchy coverage rather than clean dots. TW 5570 is best used as solid flood coverage or large graphic elements. For subtle metallic shimmer effects at varying opacity, use TW 5532 Metallic Clear mixed into a standard color instead.
What mesh count should I use for printing TW 5570?
Use 200–230 mesh monofilament polyester for best metallic flake transfer. Finer meshes (above 230) restrict flake particle passage and reduce metallic reflectivity. Coarser meshes (below 160) may produce uneven coverage. A 70–75 durometer squeegee at moderate pressure gives the cleanest metallic film. Stir TW 5570 frequently during the print run to keep aluminum flake in suspension throughout the ink body.
Can I overprint other TW 5500 colors over TW 5570 Metallic Silver?
Yes — this is one of the most effective techniques with TW 5570. Allow TW 5570 to fully dry (30–45 minutes air dry or force dry at 90–120°F), then overprint any transparent TW 5500 color over the metallic surface. The metallic foundation shows through the transparent color, creating colored metallic effects that look genuinely hand-crafted. Use TW 5530 Clear Flat Base mixed into the overprint color to increase transparency and enhance the metallic interaction.
Is TW 5570 Metallic Silver press-ready or does it need to be modified before printing?
Press-ready for most applications — stir well from the bottom of the bucket and print. TW Graphics supplies the 5500 Series at correct press viscosity for standard equipment and conditions. You may need to adjust with a small amount of water or TW Z1820 Thinner if your press runs at higher speeds or your shop is warm.
Why is my ink drying in the screen between strokes?
Common in warm shop conditions or on slow edition runs. Fixes in order: (1) add TW Z1822 Retarder at 5% and re-test; (2) increase flood bar frequency to keep ink moving; (3) lower shop temperature or add airflow around the press; (4) switch to TW Z1823 Slow Retarder for extreme heat conditions. Never exceed 5–10% total retarder — over-retarding causes blocking.
I’m seeing pinholes in solid areas on the automatic press. What’s causing it?
Almost certainly foam from the flood bar beating air into the ink at high speeds. Fix: add TW 5100 Defoamer at 1% by weight, stir gently (vigorous stirring defeats the defoamer), and allow 2–3 minutes before going back to press. If pinholes persist, add another 0.5%. Never exceed 2% — over-defoaming causes fish-eye defects.
What substrates does TW 5570 adhere to?
The TW 5500 Series adheres to: fine art serigraph paper and board, polystyrene, Tyvek®, Tedlar®, polycarbonate, treated polyesters (substrate, not fabric), pressure-sensitive vinyl, aircraft interior panels, and skateboards. Always allow 24 hours after printing before evaluating adhesion to a new substrate. The end-user must determine suitability for the specific application before full production.
Can I mix TW 5570 with other TW 5500 colors?
Yes — all TW 5500 Series colors are formulated in the same ink system and mix cleanly together. See the “Mixing Potential” section above for specific color combinations that work well with TW 5570 Metallic Silver. For exact Pantone matching, TW Custom Pantone Water-Based Inks are also available.
What emulsion should I use with TW 5570?
We recommend Murakami Photocure Pro for TW Graphics water-based poster inks. Dual-cure photopolymer with 38% solids, outstanding resolution, and stencil durability for long poster runs. For extended high-volume runs, treat your Photocure Pro screens with Murakami MS Hardener before going to press for maximum stencil longevity.
Why buy from River City Supply instead of another distributor or direct from TW?
River City Supply is an authorized TW Graphics distributor based in San Antonio, TX. TW Graphics is based in California. Orders placed before 3:30 PM CT ship the same business day — 1–3 day transit to most of the U.S., faster than ordering from TW direct. Orders over $200 ship free. Our team at (512) 454-0505 can help with color selection, additive formulation, substrate compatibility, and emulsion recommendations for your specific jobs.
Questions? Call (512) 454-0505 or email [email protected]
Reviews
Only logged in customers who have purchased this product may leave a review.




























































Reviews