TW 5590 Flat Aurora Pink Water-Based Poster Ink – Bright, High-Impact Pink for Poster & Flat Stock Screen Printing
TW Graphics
TW 5590 Aurora Pink is a vivid, high-energy coral-pink water-based screen printing ink from the TW 5500 Flat Series — an intensely saturated, warm pink that sits between hot pink and coral on the spectrum, delivering the electric, eye-catching character that concert poster work, music festival graphics, and high-energy flat-stock design demand. Shops that need pink to stop traffic order TW 5590. Available in quart and gallon, in stock at River City Supply, ships same day from San Antonio, TX.
✓ High-Chroma Aurora Pink
✓ Concert Poster Pink
✓ Flat / Matte Finish
✓ Press Ready
✓ Made in USA
🚚 Same-Day Shipping Before 3:30 PM CT | Free Shipping Over $200 | Stocked in San Antonio, TX
Price range: $89.99 through $233.06
Description
TW Graphics — TW 5500 Flat Series — Water-Based Poster Ink
TW 5590 Flat Aurora Pink — Water-Based Poster Ink
TW 5590 Flat Aurora Pink is a vivid, high-energy coral-pink water-based poster ink from the TW 5500 Multi-Purpose Water-Based Series — an intensely saturated, warm pink that sits between hot pink and coral on the spectrum, delivering the electric, eye-catching character that concert poster work, music festival graphics, and high-energy flat-stock design demand. Pigmented with automotive-grade colorants for up to 3 years of light-fastness, press ready, and formulated for the full specialty flat-stock substrate range.
Key Features
Electric Coral-Hot Pink Character
TW 5590 reads as vivid, warm, and electric — a pink that commands immediate attention rather than gently suggesting it. Its coral-hot pink character is maximally energetic, making it the natural choice for concert poster work, event graphics, and any flat-stock application where pink needs to jump off the surface.
Vivid Pink Tint & Mixing Base
TW 5590 tints easily with TW 5521 White for a range of vivid warm pinks from neon coral to soft peach. Mix with TW 5505 Magenta for deeper, cooler pink-reds. Add a touch of TW 5503 Yellow Shade Red for even warmer coral-orange tones. Its strong pigmentation means small additions to tint mixes deliver vivid color contribution.
Rich Flat Finish
TW 5500 Series inks cure to a controlled flat/matte surface that eliminates glare, enhances color depth under gallery and stage lighting, and gives printed pieces a premium hand-pulled serigraph feel.
Press Ready
Supplied press-ready for most applications. Stir well and print. Additives available for specific conditions but not required for standard runs.
Multi-Substrate Adhesion
Adheres to polystyrene, Tyvek®, Tedlar®, polycarbonate, treated polyesters, pressure-sensitive vinyl, and aircraft interior panels — the full flat-stock and specialty print substrate range.
Fast, Clean Cleanup
Water-based chemistry means screens clean with water. No harsh solvents, no hazardous waste from the ink itself. Faster between-run cleanup than solvent systems.
Color Character & On-Press Behavior
Understanding how TW 5590 Aurora Pink behaves on press — not just what it looks like in the bucket — is what separates professional poster printers from the rest.
Color Bias & Character
Warm vivid pink — coral-hot pink character. High chroma. Electric rather than soft. One of the most visually energetic pinks in the TW 5500 lineup.
Mixing Potential
Tints easily with TW 5521 White for vivid warm pinks from neon coral to peach. Mix with TW 5505 Magenta for deeper cool-pinks. Add TW 5593 Orange for vivid coral-orange tones.
Halftone Performance
Strong pigmentation delivers vivid pink even at moderate dot percentages. Effective for high-energy pink gradient work and coral-palette effects.
Print Sequence
Print in mid-sequence as a vivid accent or background color in high-energy palette builds.
Who Prints with TW 5590 Aurora Pink?
🎤 Concert & Gig Poster Shops
Pink and coral are staples of contemporary poster art aesthetics. TW 5590’s vivid, electric character makes it a standout accent and background color in high-energy poster designs where maximalism and color intensity are part of the visual language.
🍽 Music Festival & Event Promotions Printers
Festival graphics, event promotions, and entertainment design regularly use vivid, saturated pinks for their immediate visual impact and emotional resonance. TW 5590 delivers that character with the light-fastness and substrate compatibility of the TW 5500 Series.
🍴 Lifestyle & Fashion-Adjacent POP Display Printers
Retail display in fashion, beauty, and lifestyle categories often uses vivid coral and hot pink as primary brand and campaign colors. TW 5590 delivers consistent, vivid pink on polystyrene and PS vinyl for high-impact retail display applications.
🌟 Fine Art Serigraph Studios (Vibrant Palette Work)
Serigraph studios working in vivid, maximalist, or pop-art-adjacent palettes use TW 5590 as a high-chroma pink anchor in editions where color energy and saturation are part of the artistic statement.
On-Press Setup — TW 5590 Aurora Pink
Mesh Count
200–380 monofilament polyester. Start at 230 mesh for solid spot-color coverage. Use 305–380 for fine halftone and detail work. Higher mesh = finer detail, lower opacity per pass.
Squeegee
70–85 durometer polyurethane, sharp edge. Start at 75 durometer for most applications. Use a harder squeegee (80–85) for fine halftone work. Ensure sharp, clean edge for consistent ink transfer.
Stencil
Solvent and water-proof emulsion only. Murakami Photocure Pro dual-cure photopolymer is preferred for all TW 5500 Series work. For extended long runs, apply Murakami MS Hardener before going to press.
Drying
Air dry: 20–30 minutes at room temperature between color passes. Force dry: a few seconds at 90–150°F for faster production. Allow full dry before stacking prints or applying overprint passes.
Press Preparation
Stir TW 5590 Aurora Pink thoroughly from the bottom of the bucket before press-up. Off-contact distance of 1⁄16″–1⁄8″ is typical for flat-stock applications. Print a test sheet before committing to the full edition.
Cleanup
Clean screens with water immediately after press-down. Do not allow TW 5500 Series inks to dry in the screen. For stencil reclaim, use a standard water-based emulsion remover after water cleanup.
TW Graphics Additives for TW 5590 Aurora Pink
TW 5500 Series inks are press-ready for most applications. When press conditions require adjustment, TW Graphics offers a complete additive line specifically engineered for the 5500 Series system. Never use additives from other ink systems — they may cause adhesion, drying, or compatibility problems.
Browse all TW Graphics water-based additives at River City Supply →
Complete TW 5500 Flat Series Color Lineup
Shop the complete TW 5500 Series below. TW 5590 Aurora Pink is highlighted. All 43 colors available in quart and gallon, in stock at River City Supply, ships same day from San Antonio, TX.
Screen Room Recommendation
Best Emulsion for TW Graphics Poster Inks: Murakami Photocure Pro
TW 5500 Series inks demand a stencil that holds fine halftone detail, resists moisture breakdown through long runs, and survives the water-based ink environment without edge bleed or stencil degradation. Our recommendation is Murakami Photocure Pro — and for extended long runs, Murakami MS Hardener applied before going to press.
Why Buy TW Graphics Inks from River City Supply?
Authorized TW Graphics distributor based in San Antonio, TX — center of the country. We stock the full TW 5500 lineup deep, ship same day before 3:30 PM CT, and know these inks inside and out.
🕒 Same-Day Shipping
Orders before 3:30 PM CT ship the same business day from San Antonio, TX.
🌎 Faster Than Ordering Direct
TW Graphics ships from California. We ship from San Antonio — 1–3 day transit to most of the U.S.
🚚 Free Shipping Over $200
Hit $200 and shipping is on us. Stock the full 5500 lineup in one order.
📦 Full Lineup Stocked
Every TW 5500 color, all additives, Murakami emulsions. No backorders.
🎉 Authorized TW Distributor
Genuine TW Graphics product. Full technical support on every order.
📞 Real People, Real Help
Call (512) 454-0505 or email [email protected]
⚠ Over-Reduction Warning
Over-reduction with retarders and thinners can result in blocking and a significant reduction in drying speed. Never exceed recommended additive levels.
⚠ Test Before Production
Always run a test print on the production substrate first. Substrate surface energy, mesh count, and squeegee hardness all interact with final print results.
⚠ 24-Hour Evaluation
Allow at least 24 hours after printing before evaluating adhesion and suitability for the substrate and intended end use.
Build Your Full Color Palette
Shop the complete TW 5500 Flat Series and build your full palette in one order with same-day shipping from San Antonio, TX.
Stock Your Additives
Add TW Z1820 Thinner, TW 5100 Defoamer, and TW Z1822 Retarder to your order — the three additives most commonly needed in TW 5500 Series production.
Ready to Order?
Call (512) 454-0505 or email [email protected]. Same-day shipping before 3:30 PM CT. Free shipping over $200.
Technical Specifications
| Specification | Detail |
|---|---|
| SKU | TW 5590 Aurora Pink |
| Color Properties | Warm vivid pink; coral-hot pink character; high chroma; electric rather than soft; one of the most visually energetic pinks in the TW 5500 lineup. |
| Series | TW 5500 Multi-Purpose Water-Based Flat Series |
| Manufacturer | TW Graphics (USA, est. 1923) |
| Ink Type | One-component, flexible, flat water-based ink system |
| Finish | Flat / Matte |
| Pigment Quality | Automotive-grade pigments |
| Light-Fastness | Up to 3 years indoor light-fastness |
| Available Sizes | Quart and Gallon |
| Press Ready | Yes — supplied press-ready. Stir well before use. |
| Compatible Substrates | Fine art serigraph paper, polystyrene, Tyvek®, Tedlar®, polycarbonate, treated polyesters, pressure-sensitive vinyl, aircraft interiors, skateboards, poster board |
| Recommended Mesh | 200–380 (80–150 cm) monofilament polyester |
| Squeegee | 70–85 durometer polyurethane, sharp edge |
| Stencil | Solvent and water-proof emulsion only. Dual-cure recommended — Murakami Photocure Pro preferred. |
| Air Dry | 20–30 minutes at room temperature |
| Force Dry | Seconds at 90–150°F (32–66°C) |
| Coverage Rate | 1,400–2,000 sq ft per gallon (33–47 sq meters per liter) |
| TW Z1820 Thinner | 5–10% by weight — standard press viscosity reducer |
| TW Z1822 Retarder | 5–10% by weight — normal open time extension |
| TW Z1823 Slow Retarder | 5–10% by weight — heavy-duty open time; slow print cycles |
| TW 5100 Defoamer | 1–2% by weight — eliminates bubbling at high press speeds. Do not exceed 2%. |
| TW 25233 Flattening Powder | 1–8% by weight — reduces gloss to satin or matte |
| TW XPX1018 WB-Activator | 10% by weight — chemical resistance. 24-hr pot life. One reactivation allowed. |
| Evaluation Period | Allow 24 hours after printing before evaluating adhesion and suitability |
| Ships From | San Antonio, TX — same-day on orders before 3:30 PM CT |
| Country of Origin | USA |
Technical Sheets / Safety Data Sheets / Documents
FREQUENTLY ASKED QUESTIONS
How does TW 5590 Aurora Pink differ from TW 5505 Flat Magenta?
TW 5505 Flat Magenta is a pure, process-compatible magenta with a clean blue-pink character — precise, spectral, and versatile for mixing purples and sophisticated palette work. TW 5590 Aurora Pink is warmer, more coral-adjacent, and more visually energetic — a hot pink-coral that reads as vibrant and immediate rather than pure and precise. TW 5505 is the mixing and process magenta; TW 5590 is the bold, high-energy hot pink.
Can TW 5590 be used to make vivid peach and salmon tones?
Yes — add TW 5590 to TW 5521 Hi-Hide White at 5–15% for vivid, warm peach and coral-salmon tones. For a more orange-salmon character, add a small amount of TW 5593 Fire Orange to the mix. TW 5590’s warm bias keeps all tint mixes in the vivid, warm coral range rather than producing cool, pastel pinks.
Does TW 5590 work well for large flood coverage areas?
Yes — TW 5590 prints large solid coverage areas effectively on 200–230 mesh monofilament polyester. On automatic presses running large solid pink flood areas, add TW 5100 Defoamer at 1% to prevent pinholes from foam in the ink body at high press speeds. In warm shop conditions, add TW Z1822 Retarder at 5% to prevent in-screen drying during long edition runs.
Is TW 5590 Aurora Pink press-ready or does it need to be modified before printing?
Press-ready for most applications — stir well from the bottom of the bucket and print. TW Graphics supplies the 5500 Series at correct press viscosity for standard equipment and conditions. You may need to adjust with a small amount of water or TW Z1820 Thinner if your press runs at higher speeds or your shop is warm.
Why is my ink drying in the screen between strokes?
Common in warm shop conditions or on slow edition runs. Fixes in order: (1) add TW Z1822 Retarder at 5% and re-test; (2) increase flood bar frequency to keep ink moving; (3) lower shop temperature or add airflow around the press; (4) switch to TW Z1823 Slow Retarder for extreme heat conditions. Never exceed 5–10% total retarder — over-retarding causes blocking.
I’m seeing pinholes in solid areas on the automatic press. What’s causing it?
Almost certainly foam from the flood bar beating air into the ink at high speeds. Fix: add TW 5100 Defoamer at 1% by weight, stir gently (vigorous stirring defeats the defoamer), and allow 2–3 minutes before going back to press. If pinholes persist, add another 0.5%. Never exceed 2% — over-defoaming causes fish-eye defects.
What substrates does TW 5590 adhere to?
The TW 5500 Series adheres to: fine art serigraph paper and board, polystyrene, Tyvek®, Tedlar®, polycarbonate, treated polyesters (substrate, not fabric), pressure-sensitive vinyl, aircraft interior panels, and skateboards. Always allow 24 hours after printing before evaluating adhesion to a new substrate. The end-user must determine suitability for the specific application before full production.
Can I mix TW 5590 with other TW 5500 colors?
Yes — all TW 5500 Series colors are formulated in the same ink system and mix cleanly together. See the “Mixing Potential” section above for specific color combinations that work well with TW 5590 Aurora Pink. For exact Pantone matching, TW Custom Pantone Water-Based Inks are also available.
What emulsion should I use with TW 5590?
We recommend Murakami Photocure Pro for TW Graphics water-based poster inks. Dual-cure photopolymer with 38% solids, outstanding resolution, and stencil durability for long poster runs. For extended high-volume runs, treat your Photocure Pro screens with Murakami MS Hardener before going to press for maximum stencil longevity.
Why buy from River City Supply instead of another distributor or direct from TW?
River City Supply is an authorized TW Graphics distributor based in San Antonio, TX. TW Graphics is based in California. Orders placed before 3:30 PM CT ship the same business day — 1–3 day transit to most of the U.S., faster than ordering from TW direct. Orders over $200 ship free. Our team at (512) 454-0505 can help with color selection, additive formulation, substrate compatibility, and emulsion recommendations for your specific jobs.
Questions? Call (512) 454-0505 or email [email protected]
Reviews
Only logged in customers who have purchased this product may leave a review.






























































Reviews