Supacolor Headwear Transfers – Large Transfers 4.7″x2.8″
Supacolor
Supacolor Headwear Transfer — Large 4.7″ × 2.8″ is a full-color heat transfer engineered for caps and hats. It presses cleanly over seams and even mesh without cracking, so your logo stays sharp on the curved, uneven surface of a hat. Standard cap-front size — full-front hat logos.
✓Presses over seams & mesh
✓Built for curved cap fronts
✓Full color · PMS & metallics
✓No cracking or lifting
✓Water-based ink · OEKO-Tex sheet
✓Drop-ships direct from Supacolor
🚚 Drop-ships direct from Supacolor|🧢 Presses over seams & mesh|⚡ Fast production — message for turnaround|📞 (512) 454-0505 · Authorized Distributor
$2.85
Description
Supacolor Headwear Transfer — Large 4.7″ × 2.8″
Caps are one of the hardest things to decorate: seams and mesh panels make ordinary transfers crack, lift, or distort. Supacolor Headwear is engineered specifically for headwear — it bridges seams and presses across mesh without cracking, conforming to the curves and panels of a hat while keeping Supacolor’s vibrant, durable, full-color finish.
This Large 4.7″ × 2.8″ transfer is printed to your artwork with no color limits. Full-front logos on five-panel and trucker caps, including designs that cross the center seam.
Why Printers Choose Headwear
🧢
Built for Caps
Engineered to conform to the curves, seams, and panels of headwear for a clean, professional press.
✂️
Over Seams & Mesh
Bridges center seams and presses across mesh panels without cracking — where standard transfers fail.
🌈
Full Color, PMS & Metallics
Vibrant, photographic color with PMS/Pantone matching and metallics at no extra cost.
💪
Durable Finish
Holds up to wear with Supacolor’s wash durability, sized and built for hats.
💧
Water-Based & OEKO-Tex
Water-based ink on an OEKO-Tex Standard 100 accredited sheet — better for you and the planet.
🏢
Team & Brand Caps
Perfect for uniform headwear, promotional caps, and branded merch programs.
How to Apply Your Headwear Transfer
1
Set your press
Use a heat press at about 290–300°F with medium/firm pressure (around 40 PSI). A cap/hat press platen gives the best results on curved fronts. Follow the included instruction sheet.
2
Position on the cap
Center the transfer on the cap front, letting it sit naturally over the seam or mesh. Keep it square to the brim.
3
Cover and press
Lay a Teflon or parchment sheet over the transfer and press, making sure pressure is even across the curved surface.
4
Hot peel
Peel immediately while hot, from a corner in one smooth motion, holding the cap steady with your free hand.
5
Post-press
Re-cover and post-press a few seconds to seal the edges over the seam for lasting durability.
Why Headwear Instead of Wearable
Standard transfers are built for flat fabric. On a cap, the center seam and mesh panels flex and break a normal transfer over time. Headwear is formulated to bridge those seams and mesh openings so the design stays intact on the curved, uneven hat surface.
- Ideal for five-panel caps, trucker/mesh hats, beanies, and curved cap fronts
- Best choice any time your design crosses a center seam or mesh panel
- For a flat single panel where the design stays clear of seams, a Wearable transfer can also work
- A cap/hat heat press platen helps deliver even pressure on curved fronts
Choosing & Using This Transfer
Which size do I need?
This is the Large 4.7″ × 2.8″ option. The Large 4.7″ × 2.8″ suits full cap-front logos; the Small 2.5″ × 2.5″ is for sides, backs, beanies, and compact marks.
Headwear or Wearable?
Use Headwear whenever the design crosses a seam or mesh. For flat, single-panel placements clear of seams, Wearable can also work.
Do I need a hat press?
A standard flat press can work for many caps, but a cap/hat press platen makes it much easier to apply even pressure across the curved front.
Headwear Size Guide
| Headwear Size | Best For |
|---|---|
| Large 4.7″ × 2.8″ ◀ YOU ARE HERE | Standard cap-front size — full-front hat logos |
| Small 2.5″ × 2.5″ | Small — side, back, and compact logos |
Before You Press
Use a real heat press
Not for a household iron or Cricut Easy Press. A cap/hat press platen is recommended for curved fronts.
Mind the seam
Center the design over the seam and keep pressure even so the transfer bridges it cleanly.
Custom & made to order
Each transfer is custom-printed to your artwork, so it’s non-returnable. Confirm your art and size before ordering.
Artwork tips
Details under ~1 pt get a thin garment-color outline. Avoid drop shadows, glows, and fades, and only submit artwork you’re authorized to print.
Branding caps for a team or shop?
Send us your logo and cap style — we’ll help you size it right for a clean press over seams and mesh.
Technical Specifications
Technical Specifications
| Supacolor Headwear — Large 4.7″ × 2.8″ | |
|---|---|
| Product | Supacolor Headwear Transfer — Large 4.7″ × 2.8″ |
| Product line | Supacolor Headwear (cap & hat heat transfer) |
| Transfer size | 4.7″ × 2.8″ |
| Format | Single image (one design per transfer) |
| Engineered for | Pressing over cap seams and mesh panels without cracking |
| Ink | Water-based (not plastic / PVC) |
| Certification | OEKO-Tex Standard 100 accredited sheet |
| Color capability | Full color, unlimited colors, photographic detail; PMS/Pantone matching and metallics at no extra cost |
| Designed for | Five-panel caps, trucker/mesh hats, beanies, curved cap fronts, and designs that cross seams |
| Press type | Heat press with adjustable, even pressure; cap/hat press platen recommended for curved fronts. NOT a household iron or Cricut Easy Press |
| Temperature | Approx. 290–300°F |
| Pressure | Medium / firm (approx. 40 PSI) |
| Press time | Approx. 12–15 seconds |
| Peel | Hot peel — immediately, from a corner, in one smooth motion |
| Post-press | A few seconds under Teflon/parchment to seal over the seam |
| Exact settings | Per the instruction sheet included with your order — see Supacolor pressing instructions. Settings vary by press and cap |
| Wash durability | Wash-tested 50+ washes (tested past 70) without cracking |
| Fulfillment | Custom-printed and drop-shipped direct from Supacolor |
| Returns | Custom-made product — non-returnable |
Technical Sheets / Safety Data Sheets / Documents
FREQUENTLY ASKED QUESTIONS
Frequently Asked Questions
What is the Supacolor Headwear transfer for?
Headwear is a full-color heat transfer engineered for caps and hats. It presses over seams and mesh panels without cracking, so logos stay sharp on the curved surface of a hat.
Why not just use a Wearable transfer on a cap?
Wearable transfers are built for flat fabric. On a cap, the center seam and mesh flex and can crack a standard transfer over time. Headwear is made to bridge seams and mesh. For a flat single panel clear of seams, Wearable can also work.
What caps does it work on?
Five-panel caps, trucker and mesh hats, beanies, and curved cap fronts — especially designs that cross a center seam or mesh panel.
Hot peel or cold peel?
Hot peel. Press at about 290–300°F with medium/firm pressure for roughly 12–15 seconds, then peel immediately from a corner and post-press a few seconds to seal over the seam.
Do I need a special hat press?
Not strictly — many caps can be pressed on a standard flat press. But a cap/hat press platen makes it much easier to apply even pressure across the curved front for the cleanest result.
Can I PMS match or print metallics?
Yes. Headwear is a screen-printed-style Supacolor transfer, so we can PMS/Pantone match your brand colors and print metallics at no extra cost.
Can I use a household iron or Cricut Easy Press?
No. Headwear needs a heat press that delivers consistent, even pressure. A household iron or Cricut Easy Press can’t maintain the pressure required for a clean, durable bond over seams.
Which size should I order?
The Large 4.7″ × 2.8″ suits full cap-front logos; the Small 2.5″ × 2.5″ is for sides, backs, beanies, and compact marks. See the size guide on this page.
How durable is it?
Applied correctly, Headwear is wash-tested to 50+ washes (testing stopped at 70) without cracking, even over the cap seam.
How does shipping work?
Headwear transfers are custom-printed and drop-ship directly from Supacolor. Production typically takes a few business days — message us for the current turnaround on your order.
Are they returnable?
Because each transfer is custom-printed to your artwork, it’s a non-returnable product. Please confirm your design and size before ordering.
Still have a question about Headwear?
Reviews
Only logged in customers who have purchased this product may leave a review.
Reviews