CCI GTX Blue Screen Printing Emulsion – Hybrid Photopolymer Emulsion for Plastisol, UV & Solvent Inks

Application & Screen Preparation

1. Mesh Preparation:
   • Ensure the screen is completely clean and dry before coating.
   • Use degreaser for best adhesion and stencil longevity.
2. Coating Process:
   • Apply 1–2 coats of emulsion to the print side of the screen.
   • Reverse the screen and apply 1–2 coats to the squeegee side as needed.
   • Use a clean coating trough with a smooth edge for even application.
3. Drying Conditions:
   • Maintain a temperature of 86° to 104°F (30° to 40°C) with 30% to 50% humidity.
   • Use a dehumidifier and proper airflow for optimal drying.
4. Exposure Guidelines:
   • Use an exposure calculator to determine optimal exposure times based on screen mesh, stencil thickness, and light source.
   • Handle coated screens in light-safe conditions until fully exposed.
5. Washout & Drying:
   • Spray both sides of the screen with water and allow the emulsion to soften.
   • Wash the print side until the image is fully open.
   • Thoroughly rinse and dry the screen before printing.
6. Storage & Shelf Life:
   • Unopened emulsion lasts up to one year when stored in a cool, dry place.
   • Coated screens remain usable for up to 30 days when stored properly.

Perfect for High-Volume & Detailed Screen Printing

CCI GTX Blue Emulsion is the go-to emulsion for screen printers needing long-lasting durability, precise resolution, and fast processing times. Whether printing with plastisol, UV, or solvent-based inks, this high-performance emulsion provides consistent, high-quality results with minimal defects and easy reclaiming.

Upgrade your screen printing workflow with CCI GTX Blue Emulsion—trusted by professionals for top-tier stencil performance and unmatched durability!

CCI ProChem® GTX Blue Red Safety Data Sheet CCI GTX RED Technical Data Sheet